ASTM D 6628 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Color of Pavement Marking Materials
Hardcopy , PDF
13-11-2023
English
21-10-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 04
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the daytime and nighttime color of retroreflective pavement marking materials used for traffic control lane markings and symbols on road surfaces. It is intended to apply throughout the service life of the material.
1.2This specification applies to both painted and tape lines, including thermoplastic, epoxy and other types.
1.3This specification is not applicable to the testing, for quality control purposes, of marking material without added drop-on beads.
1.4In addition, it does not describe requirements other than color such as retroreflectance.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5.1Exception—This specification is noted to be a SI document, where angles are generally expressed in radians. However, as angles used in retroreflection have historically been identified in degrees, the International Committee for Weights and Measures (CIPM, Comité International des Poids et Mesures) accepts the use of degrees with SI units, and European Normatives and documents from the International Commission on Illumination (CIE) use degrees for retroreflection geometry.
| ASTM D 713 : 2012 : R2017 | Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials |
| ASTM D 2205 : 2015 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 4505 : 2012 : R2017 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life |
| ASTM D 4592 : 2012 : R2017 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| ASTM E 2367 : 2005 : R2014 | Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter |
| ASTM D 7942 : 2015 | Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas |
| ASTM D 7942 : 2015 : R2023 | Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas |
| ASTM D 713 : 2023 | Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials |
| ASTM D 2205 : 2020 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 4505 : 2012 : R2022 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life |
| ASTM D 4592 : 2012 : R2022 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| ASTM D 8367 : 2021 | Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles |
| ASTM E 2367 : 2005 : R2019 | Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter |
| ASTM D 4061 : 2013 : R2018 | Standard Test Method for Retroreflectance of Horizontal Coatings |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM D 4061 : 2013 | Standard Test Method for Retroreflectance of Horizontal Coatings |
| ASTM E 1349 : 2006 : R2013 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 4061 : 1994 : R2006 | Standard Test Method for Retroreflectance of Horizontal Coatings |
| ASTM E 1349 : 1990 : R1998 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
| ASTM E 1349 : 2006 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
| ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM D 7585/D7585M : 2010 : R2015 | Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments |
| ASTM E 1349 : 2006 : R2022 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM D 7585/D7585M : 2010 : R2022 | Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments |
| ASTM E 811 : 1995 | Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions |
| ASTM E 1349 : 2006 : R2018 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM D 4061 : 1994 : R2000 | Standard Test Method for Retroreflectance of Horizontal Coatings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.