ASTM D 6821 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
Hardcopy , PDF
19-06-2020
English
06-07-2018
Committee |
D 02
|
DocumentType |
Test Method
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the measurement of the viscosity of drive line lubricants (gear oils, automatic transmission fluids, and so forth) with a constant shear stress viscometer at temperatures from –40 °C to 10 °C after a prescribed preheat and controlled cooling to the final test temperature. The precision is stated for test temperatures from –40 °C to –26 °C.
1.2The applicability of this particular test method to petroleum products other than drive line lubricants has not been determined.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3.1This standard uses the SI based unit of milliPascal second (mPa·s) for viscosity which is equivalent to centiPoise (cP).
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 8164 : 2019 | Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing |
ASTM D 4684 : 2002 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 6896 : 2012 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 3829 : 2002 : R2007 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 2983 : 2019 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
ASTM D 2983 : 2002 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM E 2877 : 2012 : EDT 1 | Standard Guide for Digital Contact Thermometers |
ASTM D 3829 : 2020 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 2983 : 2017 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
ASTM D 3829 : 2017 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 2983 : 2002 : REV A | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 4684 : 2008 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 6896 : 2018 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 2983 : 2002 : REV B | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 6896 : 2003 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 4684 : 2020 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 3829 : 2018 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 4684 : 2007 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 4684 : 2017 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 6896 : 2003 : R2007 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 4684 : 2012 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 3829 : 2012 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 6896 : 2014 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM E 2877 : 2012 : R2019 | Standard Guide for Digital Contact Thermometers |
ASTM D 4684 : 2014 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 3829 : 2002 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 4684 : 2002 : REV A | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 2983 : 2004 : REV A | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 4684 : 2007 : EDT 1 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 4684 : 1999 : EDT 1 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 2983 : 2015 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer<rangeref></rangeref > |
ASTM D 2983 : 2009 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM E 2877 : 2012 | Standard Guide for Standard Guide for Digital Contact Thermometers |
ASTM D 4684 : 2017 : REV A | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM D 2983 : 2019 : EDT 1 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
ASTM D 6896 : 2003 : EDT 1 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 2983 : 2001 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 3829 : 2014 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 2983 : 2004 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 2983 : 2003 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 3829 : 1993 : R1998 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
ASTM D 2983 : 1987 : R1993 | Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
ASTM D 4684 : 2018 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
ASTM D 6896 : 2017 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
ASTM D 2983 : 2016 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.