Skip to content
Please enter a keyword to search

  • ASTM D 6880/D6880M : 2011

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Specification for Wood Boxes

    Available format(s):  Hardcopy, PDF

    Superseded date:  31-10-2019

    Language(s):  English

    Published date:  01-04-2011

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1 This specification covers the fabrication of wood boxes. These wood boxes, when constructed, filled and closed, shall be used for the packing of contents not exceeding 1000 pounds [454 kg].

    1.2 If the use of other construction methods or techniques is acceptable and permitted (see 5.1), the resulting boxes shall be of equal or better performance than would result from the use of the specified materials and procedures. An appropriate distribution cycle, specified in Practice D4169, can be used to develop comparative procedures and criteria.

    1.3 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See for conversion of units.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 10
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 3953 : 2006 Standard Specification for Strapping, Flat Steel and Seal
    ASTM D 4169 : 2016 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
    ASTM D 6199 : 1997 : EDT 1 Standard Practice for Quality of Wood Members of Containers and Pallets
    ASTM F 1667 : 2005 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4169 : 2005 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3953 : 2007 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 6199 : 1997 : R2005 Standard Practice for Quality of Wood Members of Containers and Pallets
    ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
    ASTM D 3953 : 1991 Standard Specification for Strapping, Flat Steel and Seals
    ASTM F 1667 : 2018 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4169 : 1999 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 4675 : 2009 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3953 : 2012 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
    ASTM F 1667 : 2013 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4675 : 2006 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM F 1667 : 2011 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM F 1667 : 2011 : REV A : EDT 1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM F 1667 : 2015 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4169 : 2001 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 6199 : 2018 : REV A Standard Practice for Quality of Wood Members of Containers and Pallets
    ASTM F 1667 : 2010 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM F 1667 : 2018 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 3953 : 2005 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
    ASTM D 4169 : 2004 : REV A Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
    ASTM D 4169 : 2001 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 6253 : 2005 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
    ASTM F 1667 : 2000 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM F 1667 : 2003 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4675 : 2003 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3953 : 2007 : REV A Standard Specification for Strapping, Flat Steel and Seals
    ASTM F 1667 : 2001 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4169 : 2004 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 4169 : 2008 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 6253 : 2010 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
    ASTM D 6199 : 2018 Standard Practice for Quality of Wood Members of Containers and Pallets
    ASTM F 1667 : 2011 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4675 : 2000 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM F 1667 : 2002 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4675 : 2006 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 6253 : 2005 : REV A Standard Practice for Treatment and/or Marking of Wood Packaging Materials
    ASTM D 4675 : 2006 : EDT 2 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 4675 : 2009 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 4169 : 2014 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM F 1667 : 2017 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 4675 : 2014 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3953 : 2002 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 6199 : 2007 : R2012 Standard Practice for Quality of Wood Members of Containers and Pallets
    ASTM D 4169 : 2009 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3953 : 2013 Standard Specification for Strapping, Flat Steel and Seals
    ASTM F 1667 : 2002 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    ASTM D 6253 : 2016 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
    ASTM D 3953 : 1997 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 6253 : 1998 Standard Practice for Marking of Pallets
    ASTM D 4675 : 2014 : REV A Standard Guide for Selection and Use of Flat Strapping Materials1
    ASTM D 6199 : 2007 Standard Practice for Quality of Wood Members of Containers and Pallets
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective