ASTM D 6938 : 2017-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHOD FOR IN-PLACE DENSITY AND WATER CONTENT OF SOIL AND SOIL-AGGREGATE BY NUCLEAR METHODS (SHALLOW DEPTH)
Superseded date
31-12-2017
Published date
01-03-2017
Sorry this product is not available in your region.
CONTAINED IN VOL. 04.09, 2017 Defines the procedures for measuring in-place density and moisture of soil and soil-aggregate by use of nuclear equipment (hereafter referred to as 'gauge').
| Committee |
D 18
|
| DevelopmentNote |
Supersedes ASTM D 2922 and ASTM D 3017. (07/2007)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Supersedes |
| ASTM D 5220 : 2014 : REDLINE | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 7380 : 2015 : REDLINE | Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
| A-A-52316 Revision C:2010 | TESTER, CONSTRUCTION MATERIALS, MOISTURE & DENSITY (TCMMD) |
| AEP-55 VOL 3 PART I : 2014 | PROCEDURES FOR EVALUATING THE PROTECTION LEVEL OF ARMOURED VEHICLES - IED THREAT |
| MIL-PRF-53024 Revision C:2012 | COMPACTOR, HIGH SPEED, SELF-PROPELLED, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) |
| ASTM D 7759/D7759M : 2014 : REDLINE | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
| ASTM D 5195 : 2014 : REDLINE | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
| ASTM D 7830/D7830M : 2014 : REDLINE | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
| ASTM B 788/B788M : 2009 : R2014 | Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe |
| ASTM D 7013 : 2004 : EDT 1 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup |
| ASTM A 807/A807M : 2017 : REDLINE | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| ASTM D 7013/D7013M : 2015 : REDLINE | Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges |
| ASTM D 7013 : 2004 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup |
| ASTM D 3839 : 2014 : REDLINE | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| PIP CVS02350 : 2017 | ROADWAY AND AREA PAVING CONSTRUCTION SPECIFICATION |
| ASTM B 788/B788M : 2009 | Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe |
| ASTM D 4718/D4718M : 2015 : REDLINE | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 5080 : 2017 : REDLINE | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 5874 : 2016 : REDLINE | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
| ASTM F 1668 : 2016 : REDLINE | Standard Guide for Construction Procedures for Buried Plastic Pipe |
| ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
| ASTM B 789/B789M : 2016 : REDLINE | Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers |
| BS 1924-2:2018 | Hydraulically bound and stabilized materials for civil engineering purposes Sample preparation and testing of materials during and after treatment |
| ASTM B 790/B790M : 2016 : REDLINE | Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
| PIP CVS02100 : 2014 | SITE PREPARATION, EXCAVATION, AND BACKFILL SPECIFICATION |
| ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
| ASTM D 2167 : 2015 : REDLINE | Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method |
| ASTM D 4643 : 2017 : REDLINE | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| ASTM D 2937 : 2017-03 | TEST METHOD FOR DENSITY OF SOIL IN PLACE BY THE DRIVE-CYLINDER METHOD |
| ASTM D 4254 : 2016 : REDLINE | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 4959 : 2016 : REDLINE | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 6026 : 2013 : REDLINE | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.