• Shopping Cart
    There are no items in your cart

ASTM D 6968 : 2003 : R2015

Current

Current

The latest, up-to-date edition.

Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-12-2023

€67.30
Excluding VAT

CONTAINED IN VOL. 05.06, 2015 Defines the determination of volatile sulfur-containing compounds and minor hydrocarbons in gaseous fuels including components with higher molar mass than that of propane in a high methane gas, by gas chromatography (GC) and atomic emission detection (AED).

Committee
D 03
DocumentType
Test Method
Pages
7
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This test method is for the determination of volatile sulfur-containing compounds and minor hydrocarbons in gaseous fuels including components with higher molar mass than that of propane in a high methane gas, by gas chromatography (GC) and atomic emission detection (AED). Hydrocarbons include individual aliphatic components from C4 to C6, aromatic components and groups of hydrocarbons classified according to carbon numbers up to C12 at least, such as C6-C7, C7-C8, C8-C9 and C9-C10, etc. The detection range for sulfur and carbon containing compounds is approximately 20 to 100 000 picograms (pg). This is roughly equivalent to 0.04 to 200 mg/m3 sulfur or carbon based upon the analysis of a 0.25 mL sample.

1.2This test method describes a GC-AED method employing a specific capillary GC column as an illustration for natural gas and other gaseous fuel containing low percentages of ethane and propane. Alternative GC columns and instrument parameters may be used in this analysis optimized for different types of gaseous fuel, provided that appropriate separation of the compounds of interest can be achieved.

1.3This test method does not intend to identify all individual sulfur species. Unknown sulfur compounds are measured as mono-sulfur containing compounds. Total sulfur content of a sample can be found by summing up sulfur content present in all sulfur species.

1.4This method is not a Detailed Hydrocarbon Analysis (DHA) method and does not intend to identify all individual hydrocarbon species. Aliphatic hydrocarbon components lighter than n-hexane, benzene, toluene, ethyl benzene, m,p-xylenes and o-xylene (BTEX) are generally separated and identified individually. Higher molar mass hydrocarbons are determined as groups based on carbon number, excluding BTEX. The total carbon content of propane and higher molar mass components in a sample can be found by summing up carbon content present in all species containing carbon.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 8488 : 2022 Standard Test Method for Determination of Hydrogen Sulfide (H<inf>2</inf>S) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
ASTM D 7493 : 2022 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D 8487 : 2023 Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
ASTM D 8080 : 2021 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
ASTM D 7493 : 2014 : R2018 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

ASTM D 1946 : 1990 : R2015 : EDT 1 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D 1265 : 1997 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 6228 : 2010 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection (Withdrawn 2019)
ASTM D 5623 : 2019 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 3609 : 2000 : R2014 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 5504 : 2012 : REDLINE Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 5287 : 1997 Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM D 1945 : 1996 : EDT 1 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 5623 : 1994 : R2014 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 6228 : 1998 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D 1945 : 1996 : R2001 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 6228 : 2019 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D 1946 : 1990 : R2006 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D 1946 : 1982 Standard Method for Analysis of Reformed Gas by Gas Chromatography
ASTM D 4626 : 1995 : R2005 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 5623 : 1994 : R2009 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 3609 : 2000 : R2005 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 5504 : 2008 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 5287 : 2008 Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM D 3609 : 2000 : R2010 Standard Practice for Calibration Techniques Using Permeation Tubes
GPA 2199 : 1999 DETERMINATION OF SPECIFIC SULFUR COMPOUNDS BY CAPILLARY GAS CHROMOTOGRAPHY AND SULFUR CHEMILUMINESCENCE DETECTION
ASTM D 3609 : 2022 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 3609 : 2000 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 5287 : 2008 : R2015 Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
ASTM D 5623 : 1994 : R2004 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 4626 : 1995 : R2019 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 1265 : 2004 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 1946 : 1977 Standard Method for Analysis Of Reformed Gas By Gas Chromatography
ASTM D 1945 : 2003 : R2010 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 5504 : 1998 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1945 : 2014 : R2019 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 1946 : 1990 : R2000 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D 1265 : 2011 : R2017 : EDT 1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 1945 : 2003 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 1946 : 1990 : R2019 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D 4626 : 2023 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM E 840 : 1995 : R2013 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM D 4626 : 1995 : R2015 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 5504 : 2001 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1265 : 2005 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 5504 : 2001 : R2006 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4626 : 1995 : R2000 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 5504 : 2012 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1265 : 2004 : REV A Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 1265 : 2011 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 5504 : 2020 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1265 : 2023 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 4626 : 1995 : R2010 Standard Practice for Calculation of Gas Chromatographic Response Factors
ISO 19739:2004 Natural gas — Determination of sulfur compounds using gas chromatography
ASTM D 1945 : 2014 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 5623 : 1994 : R1999 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 1265 : 2022 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 1946 : 1990 : R2011 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM E 840 : 1995 : R2021 : EDT 1 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM D 1945 : 2014 : REDLINE Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 1945 : 1991 Standard Test Method for Analysis of Natural Gas by Gas Chromatography

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.