ASTM D 7033 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
Available format(s)
Hardcopy , PDF
Superseded date
01-03-2022
Superseded by
Language(s)
English
Published date
27-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.1.1 This practice covers the basis for code recognition of design capacities for OSB structural-use panels.
| Committee |
D 07
|
| DocumentType |
Standard Practice
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the basis for code recognition of design capacities for OSB structural-use panels. Procedures are provided to establish or re-evaluate design capacities for OSB structural-use panels. Procedures for sampling and testing are also provided. Design values stated as capacity per unit dimension are to be regarded as standard. Design capacities developed in accordance with this practice are applicable to panels intended for use in dry in-service conditions.
Note 1—This practice is based on ICC-ES Acceptance Criteria AC-182. Relative to the scope of AC-182, this practice is limited to OSB panels.
Note 2—While this practice makes reference to PS-2, this practice applies similarly to products certified to other standards such as CAN/CSA O325.
Note 3—OSB produced under PS-2 is rated with the “Exposure 1” bond classification. Exposure 1 panels covered by PS-2 are intended for dry use applications where the in-service equilibrium moisture content conditions are expected to be less than 16 %. Exposure 1 panels are intended to resist the effects of moisture due to construction delays, or other conditions of similar severity. Guidelines on use of OSB are available from manufacturers and qualified agencies.
Note 4—PS-2-10 replaced the use of nominal thicknesses with a classification term known as Performance Category, which is defined in PS-2 as “A panel designation related to the panel thickness range that is linked to the nominal panel thickness designations used in the International Building Code (IBC) and International Residential Code (IRC).” Therefore, the PS-2 Performance Category should be considered equivalent to the term “nominal thickness” used within this standard.
| ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM D 5457 : 2004 | Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 2555 : 2005 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 1990 : 2000 : R2002 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 4933 : 2016 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
| ASTM D 1037 : 2006 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 3500 : 2014 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 1990 : 2007 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 6815 : 2009 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 1761 : 1988 : R2000 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 2718 : 2018 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 4933 : 1999 : R2010 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
| ASTM D 1037 : 2012 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 5456 : 2006 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2001 : EDT 1 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2014 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3500 : 1990 : R2003 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 5456 : 2005 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 3500 : 1990 : R1995 : EDT 1 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 5456 : 2014 : REV B | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2006 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 1990 : 2016 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 1990 : 2000 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 2718 : 2000 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 3500 : 1990 : R2009 | Standard Test Methods for Structural Panels in Tension |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2555 : 2017 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 6815 : 2002 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 3501 : 1994 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5456 : 2021 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2555 : 2006 : R2011 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5457 : 2019 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4933 : 1999 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
| ASTM D 5456 : 2012 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2014 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4933 : 1999 : R2004 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
| ASTM D 5764 : 1997 : REV A | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products |
| ASTM D 5456 : 2017 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1761 : 2012 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D 3043 : 2000 | Standard Test Methods for Testing Structural Panels in Flexure |
| ASTM D 5457 : 2021 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 1761 : 1988 : R2000 : EDT 1 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 5764 : 1997 : REV A : R2013 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 5457 : 1993 : R1998 | Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 2719 : 2013 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2008 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1761 : 2006 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 5457 : 2017 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 3043 : 2000 : EDT 1 | Standard Test Methods for Testing Structural Panels in Flexure |
| ASTM D 2719 : 1989 : R1994 : EDT 1 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2017 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1037 : 1999 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5457 : 2010 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5764 : 1997 : REV A : R2002 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products |
| ASTM D 3501 : 2005 : REV A | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 5456 : 2005 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 5457 : 2019 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2010 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2001 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 4933 : 2016 : R2021 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
| ASTM D 1037 : 2006 : REV A | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 1037 : 1978 | Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5457 : 2015 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 2555 : 2017 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2009 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2718 : 2000 : R2006 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 2718 : 2000 : EDT 1 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 2718 : 2000 : R2011 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 3501 : 2005 : REV A : R2011 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 5456 : 2001 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 1999 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 6815 : 2002 : REV A | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 5457 : 2020 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 3501 : 2005 : REV A : R2018 | Standard Test Methods for Wood-Based Structural Panels in Compression |
| ASTM D 2555 : 2005 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 2555 : 1998 | Standard Test Methods for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2013 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 1761 : 1988 : R1995 : EDT 1 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 5456 : 2009 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457 : 2021 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5456 : 2019 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2003 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456 : 2001 : REV A : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 1990 : 2014 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 5457 : 2018 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 3043 : 1987 : R1993 : EDT 1 | Standard Methods of Testing Structural Panels in Flexure |
| ASTM D 5456 : 2007 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2719 : 1989 : R2007 | Standard Test Methods for Structural Panels in Shear Through-the-Thickness |
| ASTM D 2555 : 1998 : EDT 1 | Standard Test Methods for Establishing Clear Wood Strength Values |
| ASTM D 2718 : 2000 : R2011 : EDT 1 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
| ASTM D 5456 : 2010 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457 : 2012 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 5456 : 2001 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 5764 : 1997 : REV A : R2007 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
| ASTM D 5456 : 2013 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457 : 2019 : REV B | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 2555 : 2015 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 5456 : 2011 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 5457 : 2004 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 2719 : 2019 | Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness |
| ASTM D 5456 : 2018 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457 : 2019 : REV C | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 2555 : 2016 | Standard Practice for Establishing Clear Wood Strength Values |
| ASTM D 3501 : 2005 | Standard Test Methods for Wood-Based Structural Panels in Compression |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.