ASTM D 7033 : 2022
Current
The latest, up-to-date edition.
Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
Hardcopy , PDF
English
02-02-2022
Committee |
D 07
|
DocumentType |
Standard Practice
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers the basis for code recognition of design capacities for OSB structural-use panels. Procedures are provided to establish or re-evaluate design capacities for OSB structural-use panels in flatwise and axial applications. Design capacities for OSB structural-use panels in edgewise applications, such as rim board, are outside the scope of this standard. Procedures for sampling and testing are also provided. Design values stated as capacity per unit dimension are to be regarded as standard. Design capacities developed in accordance with this practice are applicable to panels intended for use in dry in-service conditions.
Note 1:This practice is based on ICC-ES Acceptance Criteria AC-182. Relative to the scope of AC-182, this practice is limited to OSB panels.
Note 2:While this practice makes reference to PS 2, this practice applies similarly to products certified to other standards such as CAN/CSA O325.
Note 3:OSB produced under PS 2 is rated with the “Exposure 1” bond classification. Exposure 1 panels covered by PS 2 are intended for dry use applications where the in-service equilibrium moisture content conditions are expected to be less than 16 %. Exposure 1 panels are intended to resist the effects of moisture due to construction delays, or other conditions of similar severity. Guidelines on use of OSB are available from manufacturers and qualified agencies.
Note 4:PS 2-10 replaced the use of nominal thicknesses with a classification term known as Performance Category, which is defined in PS 2 as “A panel designation related to the panel thickness range that is linked to the nominal panel thickness designations used in the International Building Code (IBC) and International Residential Code (IRC).” Therefore, the PS 2 Performance Category should be considered equivalent to the term “nominal thickness” used within this standard.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 5764 : 2024 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 5457 : 2023 | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
ASTM D 5764 : 1997 : REV A : R2018 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 2718 : 2018 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 6815 : 2022 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
ASTM D 2718 : 2024 | Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) |
ASTM D 6815 : 2022 : REV A | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
ASTM D 5764 : 2023 : REV A | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 143 : 2023 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 5457 : 2021 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
ASTM D 5456 : 2024 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5764 : 2023 | Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products |
ASTM D 4933 : 2016 : R2021 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 3501 : 2005 : REV A : R2018 | Standard Test Methods for Wood-Based Structural Panels in Compression |
ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 3501 : 2024 | Standard Test Methods for Wood-Based Structural Panels in Compression |
ASTM D 7672 : 2024 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.