ASTM D 7164 : 2010 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
Hardcopy , PDF
28-05-2021
English
14-12-2015
CONTAINED IN VOL. 05.06, 2016 Describes the determination of heating value in high methane content gaseous fuels such as natural gas using an on-line/at-line gas chromatograph.
Committee |
D 03
|
DocumentType |
Standard Practice
|
Pages |
5
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice is for the determination of heating value in high methane content gaseous fuels such as natural gas using an on-line/at-line gas chromatograph.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 7314 : 2021 | Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling |
ASTM D 7314 : 2010 : R2015 | Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling |
ASTM D 1946 : 1990 : R2015 : EDT 1 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
ASTM D 6621 : 2000 : R2017 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 6299 : 2010 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2013 : EDT 1 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6621 : 2000 : R2006 : EDT 1 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 6122 : 2010 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 3588 : 1998 : R2017 : EDT 1 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
ASTM D 3588 : 1998 : R2017 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
ASTM D 6299 : 2017 : REV A | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2017 : REV B | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 3764 : 2013 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6299 : 2009 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6122 : 2013 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM E 1510 : 1995 : R2013 : EDT 1 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 6299 : 2013 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6122 : 2006 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 3764 : 2015 : EDT 1 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 3764 : 2001 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 5287 : 1997 | Standard Practice for Automatic Sampling of Gaseous Fuels |
ASTM D 6299 : 2010 : EDT 1 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 1945 : 1996 : EDT 1 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 3764 : 2006 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2015 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 3764 : 1992 : R1998 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 1945 : 1996 : R2001 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 5503 : 1994 : R2003 | Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
ASTM D 6122 : 2019 : REV B | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 1946 : 1990 : R2006 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
ASTM D 3588 : 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
ASTM D 6122 : 2001 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 6299 : 2000 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2010 : EDT 2 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 1946 : 1982 | Standard Method for Analysis of Reformed Gas by Gas Chromatography |
ASTM D 6299 : 2016 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6122 : 2019 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2018 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 4626 : 1995 : R2005 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM E 1510 : 1995 : R2000 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 6621 : 2000 : R2012 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 6299 : 2019 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2000 : REV A | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 1070 : 2003 : R2017 | Standard Test Methods for Relative Density of Gaseous Fuels |
ASTM E 1510 : 1995 : R2005 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 1070 : 1985 : R1998 | Standard Test Methods for Relative Density of Gaseous Fuels |
ASTM E 1510 : 1995 : R2021 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 5287 : 2008 | Standard Practice for Automatic Sampling of Gaseous Fuels |
ASTM D 6122 : 2016-02 | PRACTICE FOR VALIDATION OF THE PERFORMANCE OF MULTIVARIATE ONLINE, AT-LINE, AND LABORATORY INFRARED SPECTROPHOTOMETER BASED ANALYZER SYSTEMS |
ASTM D 1070 : 2003 | Standard Test Methods for Relative Density of Gaseous Fuels |
ASTM D 6621 : 2000 : R2006 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 6299 : 2020 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2008 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 3764 : 2015 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 5287 : 2008 : R2015 | Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024) |
ASTM D 6621 : 2000 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM E 1510 : 1995 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 4626 : 1995 : R2019 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 6299 : 2002 : EDT 1 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 3588 : 1998 : R2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
ASTM D 1946 : 1977 | Standard Method for Analysis Of Reformed Gas By Gas Chromatography |
ASTM D 1945 : 2003 : R2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 3764 : 2009 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2019 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 3588 : 1998 : R2011 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels |
ASTM D 5503 : 1994 : R1999 | Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
ASTM D 1945 : 2014 : R2019 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1946 : 1990 : R2000 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
ASTM D 1945 : 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1946 : 1990 : R2019 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
ASTM D 5503 : 1994 : R2008 | Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation (Withdrawn 2017) |
ASTM D 4626 : 1995 : R2015 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 4626 : 1995 : R2000 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 6122 : 2006 : EDT 1 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ISO 7504:2015 | Gas analysis Vocabulary |
ASTM D 6122 : 1999 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 6299 : 2007 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 6299 : 2007 : EDT 1 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 4626 : 1995 : R2010 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 1945 : 2014 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 6299 : 2017 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 1946 : 1990 : R2011 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1945 : 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1070 : 2003 : R2010 | Standard Test Methods for Relative Density of Gaseous Fuels |
ASTM D 6122 : 2009 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 6299 : 2002 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.