ASTM D 7165 : 2010 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
Hardcopy , PDF
12-11-2022
English
03-07-2015
CONTAINED IN VOL. 05.06, 2015 Defines the determination of volatile sulfur-containing compounds in high methane content gaseous fuels such as natural gas using on-line/at-line instrumentation, and continuous fuel monitors (CFMS).
Committee |
D 03
|
DocumentType |
Standard Practice
|
Pages |
6
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This practice is for the determination of volatile sulfur-containing compounds in high methane content gaseous fuels such as natural gas using on-line/at-line instrumentation, and continuous fuel monitors (CFMS). It has been successfully applied to other types of gaseous samples including air, digester, landfill, and refinery fuel gas. The detection range for sulfur compounds, reported as picograms sulfur, based upon the analysis of a 1 cc sample, is one hundred (100) to one million (1,000,000). This is equivalent to 0.1 to 1,000 mg/m3.
1.2This practice does not purport to measure all sulfur species in a sample. Only volatile compounds that are transported to an instrument under the measurement conditions selected are measured.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 8080 : 2021 | Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel |
ASTM D 7800/D7800M : 2014 | Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023) |
ASTM D 7493 : 2014 : R2018 | Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection |
ASTM D 6122 : 2021 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM D 6621 : 2000 : R2017 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 3606 : 2007 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 6621 : 2000 : R2006 : EDT 1 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 3606 : 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 6122 : 2010 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 1072 : 2006 : R2012 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
ASTM D 6228 : 2010 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection (Withdrawn 2019) |
ASTM D 6122 : 2020 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM D 3764 : 2013 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 3606 : 2004 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 6122 : 2013 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2006 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 3764 : 2015 : EDT 1 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 3764 : 2001 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 4468 : 1985 : R2015 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry |
ASTM D 4468 : 1985 : R2000 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
ASTM D 1945 : 1996 : EDT 1 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 3606 : 2006 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 3764 : 2006 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2015 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6228 : 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
ASTM D 3764 : 1992 : R1998 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 1945 : 1996 : R2001 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 4084 : 1982 : R1988 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 6228 : 2019 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
ASTM D 6122 : 2019 : REV B | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 1072 : 1990 : R1999 | Standard Test Method for Total Sulfur in Fuel Gases |
ASTM D 4084 : 2006 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 6122 : 2001 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 4084 : 2005 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 6122 : 2019 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2018 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 4626 : 1995 : R2005 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 3764 : 2019 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 3606 : 2022 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
ASTM D 6621 : 2000 : R2012 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 4084 : 1994 : R1999 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 3606 : 2017 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
ASTM D 6621 : 2021 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 3606 : 2006 : EDT 1 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 3764 : 2022 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 5504 : 2008 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 4084 : 2007 : R2017 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 1072 : 2006 : R2017 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
ASTM D 6122 : 2016-02 | PRACTICE FOR VALIDATION OF THE PERFORMANCE OF MULTIVARIATE ONLINE, AT-LINE, AND LABORATORY INFRARED SPECTROPHOTOMETER BASED ANALYZER SYSTEMS |
ASTM D 6621 : 2000 : R2006 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 3764 : 2015 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 1072 : 2006 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
ASTM D 4810 : 2006 : R2011 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 6621 : 2000 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM D 4810 : 1988 : R1999 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 4626 : 1995 : R2019 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 3606 : 2004 : REV A | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 3606 : 2010 : EDT 1 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 4810 : 2006 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 1945 : 2003 : R2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 3764 : 2009 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2019 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 3606 : 2020 : EDT 1 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
ASTM D 5504 : 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 1945 : 2014 : R2019 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 4468 : 1985 : R2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<br> Rateometric Colorimetry |
ASTM D 1945 : 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 4468 : 1985 : R2006 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
ASTM D 4626 : 1995 : R2015 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 5504 : 2001 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 5504 : 2001 : R2006 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 4626 : 1995 : R2000 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 6122 : 2006 : EDT 1 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 5504 : 2012 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 3606 : 2021 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
ISO 7504:2015 | Gas analysis Vocabulary |
ASTM D 4810 : 2006 : R2015 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 3606 : 1999 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 4084 : 2007 : R2012 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 6122 : 1999 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 4626 : 1995 : R2010 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
ASTM D 1945 : 2014 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 4084 : 2007 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 3606 : 1992 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1945 : 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 6122 : 2022 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM D 6122 : 2009 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.