ASTM D 7195 : 2016 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Setting Object Color Specifications
Available format(s)
Hardcopy , PDF
Superseded date
01-07-2021
Superseded by
Language(s)
English
Published date
30-09-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 12
|
| DocumentType |
Guide
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide leads the user through a process for establishing color specifications, including the target color and allowable tolerances. It refers to the appropriate ASTM standards that more thoroughly describe each step of the process beginning with expectations, encompassing caveats within the process and finally concluding with reporting.
1.2This guide does not suggest numerical values for tolerances. These values must be agreed upon by the parties involved.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 1808 : 1996 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM E 1708 : 2020 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 4086 : 1992 : REV A : R2007 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1499 : 2016 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM E 1499 : 1997 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM E 2214 : 2008 : EDT 1 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1808 : 1996 : R2015 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM E 1499 : 1997 : R2009 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM E 2214 : 2017 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM D 3964 : 2010 : R2015 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4086 : 1992 : REV A : R2012 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1708 : 1995 : R2007 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 3964 : 2010 : R2020 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM E 1164 : 2007 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1499 : 1997 : R2003 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM E 1708 : 2014 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 1729 : 2016 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 1345 : 1998 : R2008 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 2867 : 2014 : R2019 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
| ASTM E 1708 : 1995 : R2001 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 3964 : 2004 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 3134 : 2015 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 1164 : 2009 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 5531 : 2005 : R2011 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1708 : 2014 : R2019 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 3964 : 2010 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 2214 : 2018 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 3964 : 1980 : R1998 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 1729 : 1996 : R2009 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM E 2214 : 2016 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM D 4449 : 1990 : R1999 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1345 : 1998 : R2014 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 5531 : 1994 : R2003 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1729 : 1996 : R2003 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM E 2867 : 2014 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1164 : 2012 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1164 : 1994 | Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation |
| ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 5531 : 2005 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 2867 : 2013 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
| ASTM D 3134 : 2015 : R2019 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 2214 : 2020 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM D 5531 : 1994 : R1999 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 1808 : 1996 : R2003 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM D 4086 : 1992 : REV A : R2003 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 3134 : 1997 : R2003 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 1708 : 1995 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 2214 : 2019 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1729 : 1996 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 3134 : 1997 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 4449 : 2015 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 1164 : 2002 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1164 : 2012 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 3134 : 1997 : R2008 : EDT 1 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 2214 : 2012 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 1708 : 2019 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 1345 : 1998 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 4086 : 1992 : REV A : R1997 : EDT 1 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4449 : 2008 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM E 1345 : 1998 : R2008 : EDT 1 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 2214 : 2012 : EDT 1 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 2214 : 2008 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 4086 : 2018 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1345 : 1998 : R2003 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1808 : 1996 : R2009 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM D 4449 : 1990 : R2004 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM E 2214 : 2002 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.