ASTM D 707 : 2015 : REDLINE
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
ASTM D 5047 : 2017 : REDLINE
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting |
NF ISO 15270 : 2009
|
PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
ASTM D 7293 : 2012 : REDLINE
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ASTM D 1248 : 2016 : REDLINE
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 5998 : 2016 : REDLINE
|
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
ASTM D 2103 : 2015 : REDLINE
|
Standard Specification for Polyethylene Film and Sheeting |
ASTM D 6779 : 2017 : REDLINE
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
ASTM D 3981 : 2009 : REV A : R2016
|
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
ASTM D 6778 : 2014 : REDLINE
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
ASTM D 1562 : 2015 : REDLINE
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
ASTM D 7793 : 2017 : REDLINE
|
Standard Specification for Insulated Vinyl Siding |
ASTM D 6713 : 2014 : REDLINE
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
(INACTIVE RECORD)ASTM D 5336 : 2015-04
|
CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
ASTM D 4801 : 2008
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater |
ASTM D 8065/D8065M : 2016
|
Standard Classification System and Basis for Specification for Specifying Plastic Films |
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
ASTM D 7436 : 2017 : REDLINE
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
ASTM D 6262 : 2017 : REDLINE
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
ASTM D 3935 : 2015 : REDLINE
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
ASTM D 6457 : 2008 : R2013
|
Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018) |
ASTM D 6394 : 2014 : REDLINE
|
Standard Specification for Sulfone Plastics (SP) |
17/30333280 DC : 0
|
BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
ASTM D 5926 : 2015 : REDLINE
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
ASTM D 6100 : 2017 : REDLINE
|
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
ASTM D 6778 : 2014
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
ASTM D 6779 : 2017
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
ASTM D 5336 : 2015 : REV A
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material |
ASTM D 4634 : 2016
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
ASTM D 5927 : 2017
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
ASTM D 7445 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM D 5491 : 2008 : R2014
|
Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials |
ASTM D 4068 : 2017
|
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
ASTM D 706 : 2015
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM D 5998 : 2016
|
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
ASTM D 7793 : 2017
|
Standard Specification for Insulated Vinyl Siding |
ASTM D 5205 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
ISO 15270:2008
|
Plastics — Guidelines for the recovery and recycling of plastics waste |
ASTM D 6358 : 2019 : EDT 1
|
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods |
ASTM D 4101 : 2017 : EDT 1
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
ASTM D 5675 : 2013 : R2018
|
Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders |
ASTM D 5857 : 2017 : REDLINE
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 6261 : 2014 : REDLINE
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
ASTM D 3981 : 2009 : REV A
|
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
ASTM D 5927 : 2017 : REDLINE
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
ASTM D 5989 : 2018
|
Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) |
ASTM D 1562 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
ASTM D 1710 : 2015
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
ASTM D 8195 : 2018
|
Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting |
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format |
ASTM D 4000 : 2016
|
Standard Classification System for Specifying Plastic Materials |
ASTM D 6100 : 2017
|
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
ASTM D 6713 : 2014
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
ASTM D 3678 : 2014
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
ASTM D 5926 : 2015
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
ASTM D 4635 : 2016
|
Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
ASTM D 3935 : 2015
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
ASTM D 7293 : 2012
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
ASTM D 2103 : 2015
|
Standard Specification for Polyethylene Film and Sheeting |
ASTM D 6394 : 2014
|
Standard Specification for Sulfone Plastics (SP) |
ASTM D 6261 : 2014
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM D 5047 : 2017
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting |
ASTM D 6263 : 2015
|
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
ASTM D 1248 : 2016
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 4634 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
ASTM D 6263 : 2015 : REDLINE
|
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
ASTM D 4801 : 2008 : R2016
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
ASTM D 3678 : 2014 : REDLINE
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
ASTM D 6457 : 2008
|
Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ASTM D 5138 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
ASTM D 4635 : 2016 : REDLINE
|
Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
ASTM D 4068 : 2017 : REDLINE
|
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
ASTM D 706 : 2015 : REDLINE
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM D 7445 : 2018 : REDLINE
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM D 3981 : 2009
|
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
ASTM D 1710 : 2015 : REDLINE
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |