![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
Hardcopy , PDF
18-08-2020
English
01-05-2013
CONTAINED IN VOL. 04.13, 2018 Defines guidelines for the acceptance testing frequency requirements for geonet and geonet drainage geo-composite materials describing types of tests, test methods, and recommended verifications.
Committee |
D 35
|
DevelopmentNote |
Supersedes ASTM D 7273. (06/2013)
|
DocumentType |
Guide
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers guidelines for the acceptance testing frequency requirements for geonet and geonet drainage geocomposite materials describing types of tests, test methods, and recommended verifications.
1.2This guide is intended to aid purchasers, installers, contractors, owners, operators, designers, and agencies in establishing a minimum level of effort for product acceptance testing and verification. This is intended to assure that the supplied geonet and/or geonet drainage geocomposite roll(s) meet accepted material specifications.
1.3This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this guide be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this guide means only that the guide has been approved through the ASTM International consensus process.
1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
ASCE/EWRI 12-13, 13-13, 14-13 : 2013 | STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE |
ASTM D 7931 : 2018 : REDLINE | Standard Guide for Specifying Drainage Geocomposites |
ASTM D 5321 : 2002 | Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method |
ASTM D 4759 : 2011 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
ASTM D 4873 : 1997 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 4218 : 2020 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique |
ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4355 : 2007 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
ASTM D 4716 : 2008 : R2013 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 1603 : 2001 | Standard Test Method for Carbon Black In Olefin Plastics |
ASTM D 4533 : 2004 : R2009 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 4873 : 2001 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 4491 : 1999 : REV A : R2009 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4533 : 2011 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 4533 : 2004 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 7005 : 2003 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
ASTM D 5321 : 2008 | Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method |
ASTM D 4355 : 1999 | Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus) |
ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
ASTM D 4533 : 1991 : R1996 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 4218 : 1996 : R2001 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique |
ASTM D 4716 : 2000 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
ASTM D 7179 : 2007 : R2013 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 4873 : 2002 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 6241 : 2014 : REDLINE | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 1505 : 2003 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
ASTM D 4716 : 2002 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 5199 : 2001 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ASTM D 7179 : 2007 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4218 : 1996 : R2008 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique |
ASTM D 4751 : 1999 : REV A | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4751 : 2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4759 : 2011 : R2018 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
ASTM D 4632 : 1991 : R1996 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 1603 : 2020 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 5321 : 2012 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
ASTM D 1603 : 2011 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 4759 : 2002 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 1603 : 2014 : REDLINE | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
ASTM D 4751 : 1999 : REV A : R2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4716 : 2008 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4873 : 2015 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 4716 : 2004 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 1603 : 1994 | Standard Test Method for Carbon Black In Olefin Plastics |
ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4716 : 2003 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 1603 : 2006 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 7005 : 2003 : R2008 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
ASTM D 1505 : 1968 : R1979 | Standard Test Method for Density Of Plastics By The Density-Gradient Technique |
ASTM D 4218 : 2015 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique |
ASTM D 4716 : 2007 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4759 : 2002 : R2007 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 4751 : 2012 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
ASTM D 6241 : 2004 : R2009 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 6241 : 1999 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 5199 : 2012 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
ASTM D 1505 : 2010 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
ASTM D 1505 : 2018 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
ASTM D 5199 : 2011 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4759 : 1988 : R1996 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
ASTM D 1505 : 1998 : EDT 1 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
ASTM D 6241 : 2004 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4873 : 2002 : R2009 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 4632 : 2008 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 1603 : 2014 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
ASTM D 1603 : 2012 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM D 6241 : 2004 : R2009 : EDT 1 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4751 : 2016 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 4355 : 2002 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
ASTM D 5199 : 2001 : R2006 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
ASTM D 4491 : 1999 : REV A | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 4355 : 2005 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
ASTM D 4491 : 1999 : REV A : R2004 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 7179 : 2007 : EDT 1 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 4716 : 2001 | Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4632 : 1991 : R2003 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 7179 : 2005 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
ASTM D 7179 : 2018 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 5321 : 1992 : R1997 | Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method |
ASTM D 4218 : 1996 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.