Skip to content
Please enter a keyword to search

  • ASTM D 7388 : 2018

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

    Available format(s):  Hardcopy, PDF

    Superseded date:  25-05-2023

    Language(s):  English

    Published date:  08-11-2018

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This specification covers engine coolant grade 1,3-propanediol (PDO).

    Scope - (Show below) - (Hide below)

    1.1This specification covers engine coolant grade 1,3-propanediol (PDO).

    1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 15
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 7518 : 2020 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
    ASTM D 8039 : 2016 Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
    ASTM D 7518 : 2010 : R2015 : EDT 1 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1122 : 2016 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1123 : 1999 : R2009 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 5931 : 1996 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 1122 : 2016 : R2017 : EDT 1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1122 : 2020 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1122 : 2008 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1122 : 2022 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1122 : 1997 : REV A Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 7515 : 2019 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
    ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1209 : 2000 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
    ASTM D 1123 : 2022 : REV A Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1122 : 2013 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1123 : 1999 : R2003 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 1123 : 2022 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 5931 : 1996 : R2002 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1613 : 1996 : R1999 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 1613 : 2003 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 6130 : 1997 : REV A : R2009 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
    ASTM D 1123 : 1999 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 5827 : 2022 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
    ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM E 300 : 2003 : R2022 Standard Practice for Sampling Industrial Chemicals
    ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
    ASTM D 1123 : 1959 : R1968 Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method
    ASTM D 1209 : 2005 : EDT 1 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
    ASTM D 7515 : 2009 : R2014 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
    ASTM D 3634 : 2021 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 6130 : 1997 : REV A : R2003 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
    ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
    ASTM D 1613 : 2002 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 1613 : 2006 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 1613 : 2006 : R2012 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM E 300 : 2003 : R2017 Standard Practice for Sampling Industrial Chemicals
    ASTM D 1209 : 2005 : R2011 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
    ASTM D 6130 : 2011 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
    ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 7515 : 2009 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
    ASTM D 5931 : 1996 : R2007 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 1122 : 1997 : REV A : R2002 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
    ASTM D 1209 : 2005 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
    ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 5931 : 2013 : R2017 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
    ASTM D 1613 : 2017 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
    ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 5931 : 2013 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    ASTM D 6130 : 1997 : REV A Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
    ASTM D 1209 : 2005 : R2019 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
    ASTM D 5931 : 2020 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective