ASTM D 7438 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
Hardcopy , PDF
05-11-2020
English
20-05-2013
Committee |
D 07
|
DocumentType |
Standard Practice
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice applies to the measurement of moisture content of solid wood, including solid wood products containing additives, that is, chemicals or adhesives, by hand-held moisture meters under conditions of end-use.
1.1.1This practice includes calibration, use, and interpretation of meters for conditions that relate to wood product characteristics, such as nonuniform grain and growth ring orientation, and to end-use process conditions, such as moisture gradients.
1.1.2Meters employing differing technologies may not provide equivalent readings under the same conditions. When this practice has been applied, it is assumed that the referenced meter is acceptable unless otherwise specified. Meters shall have been calibrated by Test Methods D4444.
ASTM D 1666 : 2017 | Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials |
ASTM E 2579 : 2019 | Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics |
ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
ASTM D 7469 : 2016 | Standard Test Methods for End-Joints in Structural Wood Products |
ASTM E 72 : 2015 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
ASTM D 7954/D7954M : 2015 : REV A | Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners |
ASTM E 3053 : 2018 : EDT 1 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel |
ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 6874 : 2012 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM D 4933 : 2016 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM D 6782 : 2013 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
ASTM D 4444 : 1992 : R1998 : EDT 1 | Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters |
ASTM D 4933 : 1999 : R2010 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 4444 : 2008 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM D 4933 : 1999 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM D 4933 : 1999 : R2004 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM D 4444 : 1992 : R2003 | Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters |
ASTM D 4444 : 2013 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 4444 : 2013 : R2018 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM D 6782 : 2005 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 6782 : 2002 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
ASTM D 6782 : 2004 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 6782 : 2019 | Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters |
ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.