ASTM D 7453 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
Hardcopy , PDF
28-06-2022
English
24-08-2018
This practice covers the performance requirements for sample systems employed to deliver process stream samples (1) to analyzer system for analyses or (2) for analyzer validation or (3) for composite sample systems.
Committee |
D 02
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers the performance requirements for sample systems employed to deliver process stream samples (1) to analyzer system for analyses or (2) for analyzer validation or (3) for composite sample systems. It also outlines the selection and operation of line or batch sampling equipment intended for analyzer flow proportioned average property value system validation. Sample handling, mixing, and conditioning procedures are required to ensure that a representative sample of the liquid petroleum product is collected from the sampling source.
1.2Applicable Fluids—This practice is applicable to single liquid phase petroleum products whose vapor pressure at sampling and sample storage conditions is less than or equal to 110 kPa (16.0 psi), and, with a D86 final boiling point less than or equal to 400 °C (752 °F).
1.2.1Specialized sample handling may be necessary to maintain sample integrity of more volatile materials at high temperatures or extended residence time in the receiver. Such handling requirements are not within the scope of this practice. Users should consult the analytical methods to be performed on the sample for special sample storage or conditioning requirements.
1.3Some or all of the processes outlined in this practice may be applicable to other liquids. Applying this practice to other liquids will require the consideration of additional methods and practices. It is the responsibility of the user of this standard to identify any and all applicable safety and sampling considerations and establish appropriate procedures to handle these additional considerations.
1.4The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2885 : 2019 : REV A | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
ASTM D 6624 : 2019 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 7235 : 2016 | Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices |
ASTM D 7825 : 2018 | Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer |
ASTM D 2885 : 2021 | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
ASTM D 8094 : 2021 | Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer |
ASTM D 8340 : 2021 | Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems |
ASTM D 7235 : 2021 : REV A | Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices |
ASTM D 6122 : 2021 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM D 6122 : 2010 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2020 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM D 3764 : 2013 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2013 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2006 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 3764 : 2015 : EDT 1 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 3764 : 2001 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 3764 : 2006 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2015 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 3764 : 1992 : R1998 | Standard Practice for Validation of Process Stream Analyzer Systems |
ASTM D 6624 : 2019 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 6122 : 2001 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 6122 : 2019 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6122 : 2018 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 6624 : 2014 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 6624 : 2012 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 3764 : 2015 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6624 : 2020 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 7278 : 2021 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
ASTM D 6624 : 2006 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 3764 : 2009 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
ASTM D 6122 : 2019 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
ASTM D 7278 : 2011 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
ASTM D 7278 : 2016 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
ASTM D 6122 : 2006 : EDT 1 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
ASTM D 7278 : 2006 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
ASTM D 6624 : 2001 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
ASTM D 6122 : 1999 | Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers |
ASTM D 6122 : 2009 | Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.