• There are no items in your cart

ASTM D 7469 : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Methods for End-Joints in Structural Wood Products

Available format(s)

Hardcopy , PDF

Superseded date

18-08-2021

Superseded by

ASTM D 7469 : 2021

Language(s)

English

Published date

01-09-2016

€74.48
Excluding VAT

Committee
D 07
DocumentType
Test Method
Pages
17
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This standard provides test methods for evaluating the structural capacity and integrity of end-joints in structural wood products.

1.2End-joints are manufactured by adhesive bonding of machined, mated surfaces at the ends of two pieces of lumber to form a joint. Typical end-joint configurations include finger joints and scarf joints. The combination of one or more end-joints and the adjoining sections of the structural wood product within the assembly is considered to be the test specimen.

1.3Off-line test methods include: (1) Axial Tension, (2) Bending, and (3) Cyclic Delamination.

1.4In-line test methods include: (1) Tension Proofload and (2) Bending Proofload.

1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 9 : 2020 Standard Terminology Relating to Wood and Wood-Based Products
ASTM D 1151 : 2000 : R2013 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM E 177 : 1990 : REV A : R1996 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D 2559 : 2009 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 4761 : 2013 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 4442 : 2007 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 5456 : 2006 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2014 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2915 : 2017 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 4688 : 1999 : R2013 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 5456 : 2005 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2014 : REV B Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 7438 : 2020 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 4442 : 2015 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 1183 : 2003 : R2019 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 4761 : 2002 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 7247 : 2007 : REV A : EDT 1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures (Withdrawn 2016)
ASTM D 1151 : 2000 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 5456 : 2021 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 4761 : 2011 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 2559 : 2004 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 4688 : 1999 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 1101 : 1997 : REV A Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 3434 : 2000 : R2018 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 5456 : 2012 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2014 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 3434 : 2000 : R2013 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 198 : 2021 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 7247 : 2006 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 4761 : 2018 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D 5456 : 2017 : EDT 1 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 4442 : 2016 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 1183 : 1996 : EDT 1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 5456 : 2008 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 7438 : 2013 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 7247 : 2007 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 5456 : 2017 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 4761 : 2019 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM D 4688 : 1999 : R2005 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 5456 : 2005 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2915 : 2003 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 4761 : 2005 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 5456 : 2011 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2010 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 3434 : 2000 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 7247 : 2007 : REV A Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 7438 : 2008 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D 2559 : 2010 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 4442 : 2020 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 1183 : 2003 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 5456 : 2009 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2001 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 1999 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2559 : 2012 : REV A : EDT 1 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 1151 : 2000 : R2006 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 1101 : 1997 : REV A : R2013 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 5456 : 2021 : EDT 1 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2559 : 2000 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 2559 : 2012 : REV A Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 5456 : 2013 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2009 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 7247 : 2016 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 5456 : 2019 : EDT 1 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2003 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2019 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2001 : REV A : EDT 1 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 3434 : 2000 : R2006 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 5456 : 2007 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2559 : 2003 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D 7247 : 2017 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 5456 : 2010 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 1183 : 2003 : R2011 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 4761 : 2002 : REV A Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D 2915 : 2010 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 2559 : 2012 : REV A : R2018 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 5456 : 2001 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2915 : 1998 : EDT 1 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 2559 : 2010 : REV A Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 1101 : 1997 : REV A : R2006 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 5456 : 2013 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 5456 : 2011 : REV A Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 2915 : 2002 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 198 : 2015 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 4442 : 1992 : R1997 : EDT 1 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1984 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 1101 : 1997 : REV A : R2018 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 5456 : 2018 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 4442 : 1992 : R2003 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.