![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 7504 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
Hardcopy , PDF
10-01-2020
English
12-03-2018
1.1 This test method covers the determination of total nonaromatic hydrocarbons and monocyclic aromatic hydrocarbons in benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes by gas chromatography.
Committee |
D 16
|
DocumentType |
Test Method
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of total nonaromatic hydrocarbons and monocyclic aromatic hydrocarbons in benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes by gas chromatography. The purity of benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes is also calculated. Similar test methods, using the internal standard calibration technique and the external standard calibration technique, are Test Methods D2360, D3797, D4492, D5060, D5135, D5917, and D6563 respectively.
1.2The limit of detection (LOD) is 0.0002 wt % and limit of quantitation (LOQ) is 0.0006 wt % for impurities in toluene, mixed xylenes, p-xylene, o-xylene, ethylbenzene, benzene, and styrene.
1.3In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2359 : 2018 : REV A | Standard Specification for Refined Benzene-535 |
ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
ASTM D 2700 : 2019 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 2699 : 2019 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
ASTM D 5871 : 2017 | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 4734 : 2018 : REV A | Standard Specification for Refined Benzene-545 |
ASTM D 5606 : 2017 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 7951 : 2018 | Standard Specification for Disproportionation (TDP) Toluene |
ASTM D 841 : 2017 : REV A | Standard Specification for Nitration Grade Toluene |
ASTM D 6563 : 2000 | Test Method for Benzene, Toluene, Xylene, (BTX) Concentrates Analysis by Capillary Column Gas Chromatography |
ASTM D 3797 : 2003 | Standard Test Method for Analysis of <i>o</i>-Xylene by Gas Chromatography |
ASTM D 4492 : 1998 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 1555M : 2008 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
ASTM D 5135 : 1995 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 3797 : 2005 | Standard Test Method for Analysis of <i>o</i>-Xylene by Gas Chromatography (Withdrawn 2014) |
ASTM D 3797 : 2004 | Standard Test Method for Analysis of <i>o</i>-Xylene by Gas Chromatography |
ASTM D 2360 : 2007 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 3797 : 2000 | Standard Test Method for Analysis of <i>o</i>-Xylene by Gas Chromatography |
ASTM E 1510 : 1995 : R2013 : EDT 1 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 5060 : 2007 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM D 5060 : 2006 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM D 1555M : 2004 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 2360 : 2011 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography (Withdrawn 2016) |
ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 2360 : 2004 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 4790 : 2007 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 1555M : 2000 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric] |
ASTM D 5136 : 2017 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 1555M : 2004 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
ASTM D 6229 : 2006 : R2010 | Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography |
ASTM D 4492 : 2003 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 5917 : 2002 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 2360 : 2003 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 5136 : 2000 : R2004 | Standard Specification for High Purity p-Xylene |
ASTM D 6229 : 1998 | Standard Test Method for Trace Benezene in Hydrocarbon Solvents by Capillary Gas Chromatography |
ASTM D 6563 : 2005 : EDT 1 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
ASTM D 5917 : 1999 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM E 1510 : 1995 : R2000 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 5211 : 2010 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 5136 : 2017 : REV A | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 5917 : 2015 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 6563 : 2005 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
ASTM D 5060 : 2012 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM D 1555M : 2016 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
ASTM E 1510 : 1995 : R2005 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 2360 : 2004 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 4790 : 1999 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 5211 : 2000 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 5135 : 2007 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 5917 : 2012 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 5136 : 2007 | Standard Specification for High Purity <i>p</i>-Xylene |
ASTM D 5211 : 2009 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 2360 : 2008 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 5135 : 2002 : EDT 1 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 6563 : 2011 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
ASTM D 5211 : 2001 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 5136 : 2006 | Standard Specification for High Purity p-Xylene |
ASTM D 5917 : 2009 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 4790 : 2011 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM E 1510 : 1995 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 6229 : 2006 | Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography |
ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 5211 : 2011 | Standard Specification for Xylenes for <span class="italic">p</span>-Xylene Feedstock |
ASTM D 5135 : 2016 : EDT 1 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 5211 : 2007 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 2360 : 2004 : REV A | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
ASTM D 4790 : 2014 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 6229 : 2001 | Standard Test Method for Trace Benezene in Hydrocarbon Solvents by Capillary Gas Chromatography |
ASTM D 5135 : 2014 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 5917 : 2015 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 5136 : 2009 | Standard Specification for High Purity <i>p</i>-Xylene |
ASTM D 5211 : 2006 | Standard Specification for Xylenes for <i>p</i>-Xylene Feedstock |
ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 5211 : 2016 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 6229 : 2006 : R2018 | Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography |
ASTM D 5060 : 1995 : R2000 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM D 5135 : 2016 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 1555M : 2004 : REV A | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
ASTM D 5211 : 2012 | Standard Specification for Xylenes for p-Xylene Feedstock |
ASTM D 4492 : 2007 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
ASTM D 5136 : 2009 : R2013 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 5136 : 2000 | Standard Specification for High Purity p-Xylene |
ASTM D 2360 : 2000 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 5135 : 2002 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
ASTM D 6563 : 2005 : R2010 : EDT 1 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
ASTM D 5060 : 1995 : R2000 : EDT 1 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
ASTM D 6563 : 2012 | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography (Withdrawn 2018) |
ASTM D 6563 : 2011 : REV A | Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.