• ASTM D 7602 : 2011 : R2017

    Current The latest, up-to-date edition.

    Standard Practice for Installation of Vulcanized Rubber Linings

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-09-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 06.02, 2018 Describes the techniques used to install rubber lining sheet stock in metal tanks, pipes, and other components.

    Scope - (Show below) - (Hide below)

    1.1This practice covers the techniques used to install rubber lining sheet stock in metal tanks, pipes, and other components. Installation requirements, procedures, inspection instructions, and storage conditions for the lined tanks or equipment are outlined.

    1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 33
    Document Type Standard Practice
    Product Note Reconfirmed 2017
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 5162 : 2008 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ASTM D 5162 : 2015 : REDLINE Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
    ASTM D 4538 : 2005 : EDT 1 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    NACE SP 01 88 : 2006 DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
    ASTM D 429 : 2014 : R2023 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
    NACE SP 01 78 : 2007 DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE
    ASTM D 429 : 2014 : REDLINE Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
    ASTM D 4417 : 1993 : R1999 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
    ASTM D 4417 : 2011 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
    ASTM D 4538 : 2005 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 5162 : 2021 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ASTM D 5162 : 2001 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ASTM E 1216 : 1999 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 4417 : 2014 : REDLINE Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
    ASTM D 4538 : 2015 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 4417 : 2003 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
    ASTM D 4285 : 1983 : R2018 Standard Test Method for Indicating Oil or Water in Compressed Air
    ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM E 1216 : 2021 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    SSPC-GUIDE 15 : 2013 FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES
    ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 5162 : 2015 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ASTM E 1216 : 2011 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    ASTM D 4285 : 1983 : R2006 Standard Test Method for Indicating Oil or Water in Compressed Air
    ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 4285 : 1983 : R2012 Standard Test Method for Indicating Oil or Water in Compressed Air
    ASTM D 429 : 2014 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
    ASTM E 1216 : 2006 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    ASTM E 1216 : 2011 : R2016 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    ASTM D 4285 : 1983 : R1999 Standard Test Method for Indicating Oil or Water in Compressed Air
    ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 4538 : 2021 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 4538 : 2013 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 4417 : 2014 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
    ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
    SSPC-SP 5 : 2015 WHITE METAL BLAST CLEANING
    ASTM E 1216 : 1999 : R2005 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    ASTM D 4538 : 1995 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 5162 : 2000 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
    ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
    ASTM D 4538 : 2015 : REDLINE Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
    ASTM D 429 : 2014 : EDT 1 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective