ASTM D 7659 : 2021
Current
The latest, up-to-date edition.
Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
Hardcopy , PDF
English
01-11-2021
Committee |
D 22
|
DocumentType |
Guide
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This guide provides criteria to be used in defining strategies for sampling for metals and metalloids on surfaces for workplace health and safety monitoring or evaluation.
1.2Guidance provided by this standard is intended for sampling of metals and metalloids on surfaces for subsequent analysis using methods such as atomic spectrometry, mass spectrometry, X-ray fluorescence, or molecular fluorescence. Guidance for evaluation of data after sample analysis is included.
1.3Sampling for volatile organometallic species (for example, trimethyl tin) is not within the scope of this guide.
1.4Sampling to determine levels of metals or metalloids on the skin is not within the scope of this guide.
1.5Sampling for airborne particulate matter is not within the scope of this guide. Guide E1370 provides information on air sampling strategies.
1.6Where surface sampling is prescribed by law or regulation, this guide is not intended to take the place of any requirements that may be specified in such law or regulation.
1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7202 : 2015 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
ASTM D 7822 : 2018 | Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids |
ASTM D 8344 : 2020 | Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids |
ASTM E 1727 : 2020 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM D 7296 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds |
ASTM E 1729 : 2020 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM E 1370 : 2021 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM D 1356 : 2020 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 3203 : 2021 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
ASTM E 1728/E1728M : 2020 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM D 6966 : 2024 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM E 3203 : 2024 : REV A | Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
ASTM D 3670 : 1991 : R2022 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
ASTM E 1402 : 2013 : R2023 | Standard Guide for Sampling Design |
ASTM E 3193 : 2021 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM E 3193 : 2023 | Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM E 1792 : 2020 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1402 : 2013 : R2018 | Standard Guide for Sampling Design |
ASTM D 3670 : 1991 : R2014 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
ASTM D 7202 : 2015 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
ASTM D 7440 : 2008 : R2015 : EDT 1 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
ASTM D 7202 : 2021 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
ASTM E 1728/E1728M : 2024 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 3203 : 2024 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
ASTM D 5438 : 2023 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
ASTM D 7202 : 2022 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
ASTM D 7439 : 2021 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
ASTM D 7440 : 2023 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
ASTM E 1792 : 2024 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.