• There are no items in your cart

ASTM D 7671 : 2021

Current

Current

The latest, up-to-date edition.

Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-12-2021

€56.53
Excluding VAT

Committee
D 02
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This test method covers the determination of the corrosiveness to silver by automotive spark-ignition engine fuel, as defined by Specification D4814, or similar specifications in other jurisdictions, having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C (100 °F), by one of two procedures. Procedure A involves the use of a pressure vessel, whereas Procedure B involves the use of a vented test tube.

1.2The result of the test is based on a visual rating that is classified as an integer in the range from 0 to 4 as defined in Table 1.

1.3Warning—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.

1.4The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1 and Section 7.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 5797 : 2021 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 8011 : 2019 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
ASTM D 8076 : 2021 : REV B Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 4814 : 2021 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 8275 : 2021 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM D 5798 : 2021 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2020 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2024 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 2020 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2018 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2024 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2023 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 2023 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4814 : 2022 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2023 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3241 : 2023 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4177 : 2022 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 3241 : 2023 : REV A : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 3241 : 2019 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM E 1 : 2014 : R2020 Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 2020 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 2022 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2024 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.