ASTM D 7775 : 2016
Current
Current
The latest, up-to-date edition.
Standard Guide for Measurements on Small Graphite Specimens
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 02
|
| DocumentType |
Guide
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
1.1This guide covers best practice for properties measurements on small (nonstandard) graphite specimens and requirements for representing properties of the bulk material. This guide is aimed specifically at measurements required on nuclear graphites, where there may be constraints on the geometry or volume of the test specimen, or both. The objective of this guide is to provide advice on how the application of selected standards under noncompliant conditions can be tested for suitability.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 7972 : 2014 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
| ASTM D 8091 : 2016 | Standard Guide for Impregnation of Graphite with Molten Salt |
| ASTM C 714 : 2017 | Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
| ASTM D 8255 : 2019 | Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens |
| ASTM D 7846 : 2016 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
| ASTM C 781 : 2018 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| ASTM C 781 : 2020 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| ASTM D 8091 : 2021 | Standard Guide for Impregnation of Graphite with Molten Salt |
| ASTM C 695 : 2021 | Standard Test Method for Compressive Strength of Carbon and Graphite |
| ASTM D 8356 : 2020 | Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio |
| ASTM D 8289 : 2020 | Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite |
| ASTM C 695 : 2015 : R2020 | Standard Test Method for Compressive Strength of Carbon and Graphite |
| ASTM C 1259 : 2014 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 1161 : 2002 : REV C : R2008 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM E 1461 : 2011 | Standard Test Method for Thermal Diffusivity by the Flash Method |
| ASTM E 1461 : 2007 | Standard Test Method for Thermal Diffusivity by the Flash Method |
| ASTM C 1161 : 2002 : REV C : R2008 : EDT 1 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 886 : 1998 : R2015 | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| ASTM C 749 : 1992 : R1996 | Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ASTM C 611 : 2021 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM C 611 : 1998 : R2016 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM C 1161 : 2002 : REV C : EDT 1 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 1259 : 2021 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 1161 : 2002 : REV A | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 1259 : 2001 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 886 : 2021 | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| ASTM C 1259 : 2008 : EDT 1 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM D 7972 : 2014 : R2020 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
| ASTM C 1161 : 2018 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 1161 : 2002 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM E 1461 : 1992 | Standard Test Method for Thermal Diffusivity of Solids by the Flash Method |
| ASTM C 565 : 2015 : R2021 | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| ASTM C 1259 : 2015 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 1161 : 2013 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 1259 : 1998 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 565 : 2015 | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| ASTM D 7972 : 2014 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
| ASTM C 1161 : 1994 : R1996 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM E 1461 : 2013 | Standard Test Method for Thermal Diffusivity by the Flash Method |
| ASTM C 695 : 2021 | Standard Test Method for Compressive Strength of Carbon and Graphite |
| ASTM E 1461 : 2001 | Standard Test Method for Thermal Diffusivity of Solids by the Flash Method |
| ASTM C 1161 : 2002 : REV C | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 1259 : 2008 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM C 1161 : 2002 : REV B | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.