• There are no items in your cart

ASTM D 7828 : 2012

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)

Available format(s)

Hardcopy , PDF

Withdrawn date

21-01-2021

Language(s)

English

Published date

21-03-2013

€74.48
Excluding VAT

CONTAINED IN VOL. 05.05, 2018 Defines the determination of residue in LPG by automated thermal desorption/gas chromatography (ATD/GC) using flame ionization detection (FID).

Committee
D 02
DocumentType
Test Method
Pages
15
PublisherName
American Society for Testing and Materials
Status
Withdrawn

1.1This test method covers the determination of residue in LPG by automated thermal desorption/gas chromatography (ATD/GC) using flame ionization detection (FID).

1.2The quantitation of residue covers a component boiling point range from 69°C to 522°C, equivalent to the boiling points of C6 through C40 n-paraffins.

1.2.1The boiling range covers possible LPG contaminants such as gasoline, diesel fuel, phthalates and compressor oil. Qualitative information on the nature of the residue can be obtained from this test method.

1.2.2Materials insoluble in LPG and components which do not elute from the gas chromatograph or which have no response in a flame ionization detector are not determined.

1.2.3The reporting limit (or limit of quantitation) for total residue is 6.7 µg/g.

1.2.4The dynamic range of residue quantitation is 6.7 to 3300 µg/g.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 7901 : 2014 : REV A Standard Specification for Dimethyl Ether for Fuel Purposes
ASTM D 7901 : 2014 : REV B Standard Specification for Dimethyl Ether for Fuel Purposes
ASTM D 1835 : 2018 : REV A Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 7901 : 2014 Standard Specification for Dimethyl Ether for Fuel Purposes

ASTM D 6299 : 2010 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2158 : 2005 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1265 : 1997 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 6299 : 2013 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2158 : 2016 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2017 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3700 : 2001 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 3700 : 2016 : REDLINE Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6299 : 2017 : REV B Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2009 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1835 : 1997 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 2158 : 2004 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2013 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3700 : 2014 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6299 : 2010 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2158 : 2011 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 2158 : 1989 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 3700 : 1994 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 1835 : 2018 : REV A Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 1835 : 2012 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2000 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2016 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2019 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1835 : 2003 : REV A Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2000 : REV A Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1835 : 2003 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 1835 : 2013 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 1835 : 2020 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2020 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2008 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1835 : 2018 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 2158 : 2002 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1265 : 2004 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 3700 : 2012 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6299 : 2002 : EDT 1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2158 : 2016 : REV A Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 3700 : 2007 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 1835 : 2016 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 1265 : 2011 : R2017 : EDT 1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 2158 : 1997 : EDT 1 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1835 : 2011 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 1265 : 2005 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 1265 : 2004 : REV A Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 1265 : 2011 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 2158 : 2016 : REV A : EDT 1 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 3700 : 2016 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6299 : 2007 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2007 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1835 : 2005 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 6299 : 2002 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.