Skip to content
Please enter a keyword to search

  • ASTM D 7863 : 2017

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

    Available format(s):  Hardcopy, PDF

    Superseded date:  23-08-2022

    Language(s):  English

    Published date:  11-08-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This guide covers general information, without specific limits, for selecting methods for evaluating the heating and cooling performance of liquids used to transfer heat where forced convection is the primary mode for heat transfer. Further, methods of comparison are presented to effectively and easily distinguish performance characteristics of the heat transfer fluids.

    1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Guide
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 4530 : 2003 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 7042 : 2019 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2717 : 1995 Standard Test Method for Thermal Conductivity of Liquids
    ASTM D 6743 : 2006 : R2011 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 2717 : 1995 : R2005 Standard Test Method for Thermal Conductivity of Liquids
    ASTM D 7042 : 2012 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2717 : 1995 : R2009 Standard Test Method for Thermal Conductivity of Liquids (Withdrawn 2018)
    ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 2270 : 2010 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
    ASTM D 2879 : 1997 : R2007 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 4530 : 2015 : R2020 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 6743 : 2011 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 6743 : 2006 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 2887 : 2006 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 7042 : 2016 : EDT 2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2879 : 1997 : R2002 : EDT 1 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 7042 : 2010 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 2879 : 1986 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 7042 : 2016 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2766 : 1995 : R2009 Standard Test Method for Specific Heat of Liquids and Solids (Withdrawn 2018)
    ASTM D 2887 : 2006 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 7042 : 2020 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2887 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2270 : 2004 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
    ASTM D 2887 : 2001 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
    ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 7042 : 2011 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 7042 : 2021 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2270 : 2010 : EDT 1 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
    ASTM D 4530 : 2000 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 2887 : 2019 : REV A : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2001 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 6743 : 2001 : EDT 1 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 2887 : 2016 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2270 : 2010 : R2016 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
    ASTM D 7042 : 2019 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2887 : 2008 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2018 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 6743 : 2001 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 2879 : 1983 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 2879 : 1996 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 7042 : 2012 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2879 : 1997 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
    ASTM D 2879 : 2010 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 2887 : 2019 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2013 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2270 : 1993 : R1998 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
    ASTM D 2887 : 2015 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2887 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2766 : 1995 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM D 7042 : 2012 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 4530 : 2007 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 2717 : 1995 : R2000 Standard Test Method for Thermal Conductivity of Liquids
    ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 7042 : 2021 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2887 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2766 : 1995 : R2000 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 4530 : 2015 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 4530 : 2006 : EDT 1 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 7042 : 2016 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 4530 : 2006 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 2766 : 1995 : R2005 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 2887 : 2016 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 2879 : 2018 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    ASTM D 6743 : 2011 : R2015 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    ASTM D 2887 : 2004 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 4530 : 2011 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 2887 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 7042 : 2014 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective