ASTM D 7864/D7864M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
Hardcopy , PDF
09-06-2023
English
03-07-2015
CONTAINED IN VOL. 04.13, 2017 Specifies the procedure for measuring the 'Aperture Stability Modulus' of a geogrid. (The terms 'Secant Aperture Stability Modulus, ' 'Torsional Rigidity Modulus,' 'In-plane Shear Modulus,' and 'Torsional Stiffness Modulus' have been used in the literature to describe this same property.)
Committee |
D 35
|
DocumentType |
Test Method
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This test method covers the procedure for measuring the “Aperture Stability Modulus” of a geogrid. (The terms “Secant Aperture Stability Modulus,” “Torsional Rigidity Modulus,” “In-plane Shear Modulus,” and “Torsional Stiffness Modulus” have been used in the literature to describe this same property.)
1.2This test method is intended to determine the in-plane stability of a geogrid by clamping a center node and measuring the stiffness over an area of the geogrid. This test method is applicable for various types of geogrid.
1.3This test method is intended to provide characteristic properties for design. The test method was developed for pavement and subgrade improvement calibrated design methods requiring input of aperture stability modulus.
1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.