ASTM D 8 : 2025
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Materials for Roads and Pavements
English
01-07-2025
13-08-2025
| Committee |
D 04
|
| DocumentType |
Reference Material
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard incorporates generic terms and generic definitions of terms specifically associated with road and paving materials. These generic terms and definitions are used within the standards developed by Committee D04 on Road and Paving Materials.
1.2Only terms that appear in more than one standard under the jurisdiction of Committee D04 will be included in Section 3 of Terminology D8. Terms that were historically part of this terminology but never appeared, or no longer appear, in more than one standard under the jurisdiction of Committee D04 are listed in Appendix X1. The terms in Appendix X1 are not maintained and updated by Subcommittee D04.91. The terms in Appendix X1 are available for reference purposes only. The terminology in Appendix X1 may not reflect current practices, standards, and technology used in materials for roads and pavements.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| AASHTO M 355M/M 355:2024 | Geosynthetic Pavement Interlayer for Highway Applications |
| AASHTO T 391:2020 | Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep |
| AASHTO T 393:2022 | Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT) |
| ASTM D 1139/D1139M : 2022 | Standard Specification for Aggregate for Single or Multiple Asphalt Surface Treatments |
| ASTM D 3665 : 2024 | Standard Practice for Random Sampling of Construction Materials |
| ASTM D 6925 : 2023 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 6926 : 2020 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| ASTM D 3910 : 2024 | Standard Practices for Design, Testing, and Construction of Slurry Seal |
| ASTM D 2041/D2041M : 2019 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures |
| ASTM D 5106 : 2022 | Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures |
| ASTM D 8292 : 2020 | Standard Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure |
| ASTM D 5821 : 2013 : R2017 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 692/D692M : 2020 | Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures |
| ASTM D 6088 : 2006 : R2022 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 8303 : 2020 | Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain |
| ASTM D 6155 : 2019 | Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures |
| ASTM D 7115 : 2020 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM D 4215 : 2021 | Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures |
| ASTM E 867 : 2023 | Standard Terminology Relating to Vehicle-Pavement Systems |
| ASTM D 75/D75M : 2019 | Standard Practice for Sampling Aggregates |
| ASTM D 4223/D4223M : 2020 | Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 6927 : 2022 | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM D 1754/D1754M : 2020 | Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| ASTM D 6372 : 2023 | Standard Practice for Design, Testing, and Construction of Microsurfacing |
| ASTM D 8038 : 2016 : R2022 : EDT 1 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM D 8140 : 2018 : R2023 | Standard Guide for the Use of Foundry Sand in Asphalt Mixtures |
| ASTM D 7063/D7063M : 2018 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples |
| ASTM D 8458 : 2022 | Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test |
| ASTM D 6626 : 2023 | Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder |
| ASTM D 6703 : 2019 | Standard Test Method for Automated Heithaus Titrimetry |
| ASTM D 8021 : 2023 | Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel |
| ASTM D 3666 : 2024 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 8360 : 2022 | Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test |
| ASTM D 7227/D7227M : 2022 | Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus |
| ASTM D 448 : 2012 : R2022 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM D 8572 : 2025 | Standard Practice for Determining the Impact of an Asphalt Additive on Unaged Asphalt Binder Rheology Using Dynamic Shear Rheometer |
| ASTM D 7175 : 2023 | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 2170/D2170M : 2024 | Standard Test Method for Kinematic Viscosity of Asphalts |
| ASTM D 7369 : 2020 | Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test |
| ASTM D 8379/D8379M : 2021 | Standard Practice for Evaluating Nighttime Retroreflective Sheeting Effectiveness Using Positive-Contrast Textual Sign Scenario Performance Analysis |
| ASTM D 7552 : 2022 | Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer |
| ASTM D 2321 : 2025 | Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
| ASTM D 979/D979M : 2022 | Standard Practice for Sampling Asphalt Mixtures |
| ASTM D 242/D242M : 2019 : R2024 | Standard Specification for Mineral Filler for Asphalt Mixtures |
| ASTM D 7405 : 2024 | Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 4469 : 2017 | Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures |
| ASTM D 8188 : 2023 | Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube) |
| ASTM D 140/D140M : 2016 : R2023 | Standard Practice for Sampling Asphalt Materials |
| ASTM D 6752/D6752M : 2025 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 6648 : 2025 | Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) |
| ASTM D 6373 : 2023 | Standard Specification for Performance-Graded Asphalt Binder |
| ASTM D 8189 : 2019 : R2024 | Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR) |
| ASTM D 3839 : 2025 | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| ASTM D 8531 : 2023 | Standard Specification for Latex-Based Pavement Sealers Containing Mineral Aggregates |
| ASTM D 3625/D3625M : 2020 : R2024 | Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water |
| ASTM D 546 : 2024 | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM D 4867/D4867M : 2022 : EDT 1 | Standard Test Method for Effect of Moisture on Asphalt Mixtures |
| ASTM D 2171/D2171M : 2022 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 3142/D3142M : 2025 | Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
| ASTM D 3203 : 2022 | Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures |
| ASTM D 2940/D2940M : 2020 | Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports |
| ASTM D 2489/D2489M : 2024 | Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures |
| ASTM D 2205 : 2025 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 3633/D3633M : 2023 | Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| ASTM D 2950/D2950M : 2022 | Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods |
| ASTM D 7643 : 2022 | Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders |
| ASTM D 7870/D7870M : 2020 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
| ASTM D 1369 : 2019 | Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments |
| ASTM D 8418 : 2021 | Standard Guide for Material and Construction Standards Related to Sustainability Within Committee D04 |
| ASTM D 6704 : 2022 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM D 1073 : 2016 : R2022 | Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
| ASTM D 8395 : 2023 | Standard Specification for Aramid Fiber for Asphalt Mixtures |
| ASTM D 8239 : 2023 | Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test |
| ASTM D 6297 : 2025 | Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 243/D243M : 2022 | Standard Test Method for Residue of Specified Penetration |
| ASTM D 3549/D3549M : 2018 : R2023 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens |
| ASTM D 8259/D8259M : 2021 | Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures |
| ASTM D 8225 : 2019 | Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature |
| ASTM D 8079 : 2023 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
| ASTM D 5/D5M : 2020 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D 8237 : 2021 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device |
| ASTM D 8584 : 2024 | Standard Guide for Testing of Preformed Thermoplastic Pavement Marking Material in the Laboratory and Installed Preformed Thermoplastic Pavement Markings in the Field |
| ASTM D 7313 : 2020 | Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry |
| ASTM D 6521 : 2022 | Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
| ASTM D 3628 : 2015 : R2021 | Standard Practice for Selection and Use of Emulsified Asphalts |
| ASTM F 1668 : 2016 : R2022 | Standard Guide for Construction Procedures for Buried Plastic Pipe |
| ASTM D 5361/D5361M : 2016 : R2022 | Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.