ASTM D 8088 : 2016

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy

Available format(s): Hardcopy, PDF

Superseded date: 20-06-2022

Language(s): English

Published date: 16-11-2016

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 05.06, 2016 Specifies the analysis of fluid catalytic cracking catalysts, rare earth exchanged zeolitic materials, additive and related materials when analyzed by ICP-OES for the six most common rare earth elements.

Scope - (Show below) - (Hide below)

1.1This practice describes the analysis of fluid catalytic cracking catalysts, rare earth exchanged zeolitic materials, additive and related materials when analyzed by ICP-OES for the six most common rare earth elements.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this Practice.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Appendix X3.

General Product Information - (Show below) - (Hide below)

Committee	D 32
Document Type	Standard Practice
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 8088 : 2016 : R2022

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2001	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1479 : 2016	Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3766 : 2008	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7260 : 2020	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM E 1479 : 1999 : R2005	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 3766 : 2008 : R2018	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7085 : 2004 : R2018	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2021	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM C 1109 : 2004	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2016 : REDLINE	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D 7260 : 2012	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6349 : 2013	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6349 : 2009	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 7085 : 2004 : EDT 1	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 6349 : 2000	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 3766 : 1986 : R2002	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1479 : 2016 : REDLINE	Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2008 : EDT 1	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2016	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7085 : 2004 : R2010 : EDT 1	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 3766 : 2008 : R2013	Standard Terminology Relating to Catalysts and Catalysis
ASTM E 1479 : 1999 : R2011	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 7442 : 2008	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2008 : REV A	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D 6349 : 2013 : REDLINE	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2007	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6349 : 2021	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6349 : 2008	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 7260 : 2019	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 3766 : 1986 : R1997	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7260 : 2006	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM C 1109 : 1998	Standard Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3766 : 1986 : R2007	Standard Terminology Relating to Catalysts and Catalysis
ASTM C 1109 : 2010	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6299 : 2020 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM C 1109 : 2010 : R2015	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 7085 : 2004	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM E 1479 : 1999	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 7260 : 2017	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	D 32
Document Type	Standard Practice
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM D 8088 : 2016 : R2022

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 6299 : 2010	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2001	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2013 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1479 : 2016	Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D 6299 : 2017 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017 : REV B	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2009	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3766 : 2008	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7260 : 2020	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM E 1479 : 1999 : R2005	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 3766 : 2008 : R2018	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7085 : 2004 : R2018	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 6299 : 2013	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2021	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM C 1109 : 2004	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 6299 : 2010 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2016 : REDLINE	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D 7260 : 2012	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6349 : 2013	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6349 : 2009	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 7085 : 2004 : EDT 1	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 6349 : 2000	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 3766 : 1986 : R2002	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 6299 : 2000	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1479 : 2016 : REDLINE	Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D 6299 : 2010 : EDT 2	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2008 : EDT 1	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2016	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2016	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 6299 : 2019	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2000 : REV A	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7085 : 2004 : R2010 : EDT 1	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D 3766 : 2008 : R2013	Standard Terminology Relating to Catalysts and Catalysis
ASTM E 1479 : 1999 : R2011	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 7442 : 2008	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D 6299 : 2020	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2008	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7442 : 2008 : REV A	Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D 6349 : 2013 : REDLINE	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6299 : 2002 : EDT 1	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6349 : 2007	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6349 : 2021	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D 6349 : 2008	Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 7260 : 2019	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 3766 : 1986 : R1997	Standard Terminology Relating to Catalysts and Catalysis
ASTM D 7260 : 2006	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6299 : 2007	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM C 1109 : 1998	Standard Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6299 : 2007 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3766 : 1986 : R2007	Standard Terminology Relating to Catalysts and Catalysis
ASTM C 1109 : 2010	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D 6299 : 2020 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM C 1109 : 2010 : R2015	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 7085 : 2004	Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM E 1479 : 1999	Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM D 7260 : 2017	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6299 : 2002	Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 8088 : 2016

Add To Cart

Access your standards online with a subscription