ASTM D 8155 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
Hardcopy , PDF
18-11-2023
English
22-12-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.04, 2017 Defines a procedure for leaching of solid waste to obtain an aqueous solution to be used to determine the constituents leached under the specified testing conditions.
| Committee |
D 34
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This practice covers a procedure for leaching of solid waste to obtain an aqueous solution to be used to determine the constituents leached under the specified testing conditions.
1.1.1This practice includes a procedure for the shake leaching of metal mining ore, waste rock, or metallurgical processing waste containing at least 80 % dry solids (≤20 % moisture) in order to generate a solution to be used to determine the inorganic constituents leached under the specified testing conditions and for regulatory jurisdictions requiring a water leach practice.
1.2This practice provides for the shaking of a known mass of waste with water of specified composition and the separation of the aqueous phase for analysis.
1.2.1This practice is intended to describe the procedure for performing single-batch extractions only. It does not describe all types of sampling, sample preservation, and analytical requirements that may be associated with its application.
1.3The values stated in SI units are to be regarded as standard. Values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2216 : 2005 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM E 2242 : 2002 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 5681 : 2017 | Standard Terminology for Waste and Waste Management |
| ASTM E 1915 : 2007 : REV A | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM D 5744 : 2007 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 2216 : 2010 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 6234 : 1998 : R2007 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 5744 : 2013 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM E 1915 : 1999 | Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
| ASTM D 5681 : 2008 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2018 | Standard Terminology for Waste and Waste Management |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM E 2242 : 2021 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 5744 : 1996 | Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell |
| ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 5744 : 2012 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM E 877 : 2021 | Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties |
| ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 1915 : 2005 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
| ASTM E 877 : 2013 : REDLINE | Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties |
| ASTM D 5681 : 1998 : REV A | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2016 | Standard Terminology for Waste and Waste Management |
| ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM E 1915 : 2009 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
| ASTM D 2234/D2234M : 2009 | Standard Practice for Collection of a Gross Sample of Coal |
| ASTM E 1915 : 2001 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 75/D75M : 2009 | Standard Practice for Sampling Aggregates |
| ASTM D 420 : 1998 | Guide to Site Characterization for Engineering, Design, and Construction Purposes |
| ASTM D 5681 : 2009 | Standard Terminology for Waste and Waste Management |
| ASTM D 6234 : 1998 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM E 2242 : 2007 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 5744 : 2013 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM C 471M : 2020 : REV A : EDT 1 | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
| ASTM D 2216 : 2019 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 75/D75M : 2014 | Standard Practice for Sampling Aggregates |
| ASTM E 1915 : 2011 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
| ASTM E 1915 : 2013 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
| ASTM D 5681 : 1998 : REV A : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 1998 : REV A : R2004 | Standard Terminology for Waste and Waste Management |
| ASTM E 2242 : 2013 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM E 877 : 2013 | Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties |
| ASTM D 5681 : 2016 : REV A | Standard Terminology for Waste and Waste Management |
| ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
| ASTM D 5681 : 1998 : REV A : R2004 : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2020 | Standard Terminology for Waste and Waste Management |
| ASTM E 2242 : 2012 : REV A | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 6234 : 2013 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 2216 : 1998 | Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 5744 : 2007 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 5681 : 2022 | Standard Terminology for Waste and Waste Management |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM E 2242 : 2012 : EDT 1 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 2216 : 1971 | Standard Method of Laboratory Determination Of Moisture Content Of Soil |
| ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 2234/D2234M : 2017 : REDLINE | Standard Practice for Collection of a Gross Sample of Coal |
| ASTM D 6234 : 2013 : REDLINE | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 5681 : 2022 : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 5744 : 2018 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 5681 : 2023 | Standard Terminology for Waste and Waste Management |
| ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
| ASTM D 6234 : 1998 : R2002 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 5681 : 2013 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2017-09 | TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT |
| ASTM C 471M : 2020 : REV A | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.