ASTM D 8204 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners
Available format(s)
Hardcopy , PDF
Superseded date
18-10-2022
Superseded by
Language(s)
English
Published date
30-07-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 35
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This practice covers standardized procedures for obtaining samples of geosynthetic clay liners (GCLs) from a test pad for use in assessment of the effects immediately after installation caused only by the installation techniques. The assessment may include physical testing. This practice is applicable to GCLs only.
1.2This practice is limited to full-scale test pads, and does not address laboratory modeling of field conditions. This practice does not address which test method(s) to use for quantifying installation damage.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2216 : 2005 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 5887/D5887M : 2020 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 2487 : 2017 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 5993 : 2014 | Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 1557 : 2007 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 2216 : 2010 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 1883 : 2021 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 1883 : 1999 | Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
| ASTM D 6913/D6913M : 2017 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 1883 : 2007 : EDT 1 | Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
| ASTM D 5993 : 2018 | Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners |
| ASTM D 1883 : 2007 | Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
| ASTM D 1883 : 2016 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 6102 : 2006 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 6102 : 1997 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 5888 : 2006 : R2011 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 6102 : 2012 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 5993 : 1999 : R2009 | Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 5888 : 2006 : R2016 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 6102 : 2020 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 1883 : 2005 | Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
| ASTM D 1557 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 6102 : 2004 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 6102 : 2015 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 4429 : 1993 | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2002) |
| ASTM D 1883 : 2014 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 2216 : 2019 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 5993 : 1999 : R2004 | Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners |
| ASTM D 1557 : 2002 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup>(2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5888 : 1995 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 4429 : 2004 | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place |
| ASTM D 2487 : 2006 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 1557 : 2000 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup>(2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 5993 : 1999 | Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 2487 : 2010 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 2216 : 1998 | Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 2487 : 2000 | Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 2487 : 2006 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 2216 : 1971 | Standard Method of Laboratory Determination Of Moisture Content Of Soil |
| ASTM D 4429 : 2009 : REV A | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2018) |
| ASTM D 5888 : 2019 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 2487 : 2011 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 1557 : 2009 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5888 : 2006 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 5887/D5887M : 2022 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 2487 : 2017 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 1883 : 2007 : EDT 2 | Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils |
| ASTM D 4429 : 2009 | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place |
| ASTM D 2487 : 1969 : R1975 | Standard Test Method for Classification Of Soils For Engineering Purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.