ASTM D 882 : 2026
Current
The latest, up-to-date edition.
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
English
01-04-2026
| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the determination of tensile properties of plastics in the form of thin sheeting and films (less than 1.0 mm (0.04 in.) in thickness).
Note 1:Film is defined in Terminology D883 as an optional term for sheeting having a nominal thickness no greater than 0.25 mm (0.010 in.).
Note 2:Tensile properties of plastics 1.0 mm (0.04 in.) or greater in thickness are covered by Test Method D638.
1.2This test method can be used to test all plastics within the thickness range described and the capacity of the machine employed.
1.3Specimen extension can be measured by grip separation, extension indicators, or displacement of gage marks.
1.4The procedure for determining the tensile modulus of elasticity is included at one strain rate.
Note 3:The modulus determination is generally based on the use of grip separation as a measure of extension; however, the desirability of using extensometers, as described in 6.2, is recognized and provision for the use of such instrumentation is incorporated in the procedure.
Note 4:In the context of this standard, Tensile Modulus of Elasticity can also be referred to as Modulus of Elasticity, Elastic Modulus, and Tangent Modulus.
1.5Test data obtained by this test method is relevant and appropriate for use in engineering design.
1.6The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 5:This test method is technically similar to ISO 527-3.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5047 : 2017 : R2023 | Standard Specification for Polyethylene Terephthalate Film and Sheeting |
| ASTM F 1635 : 2024 | Standard Test Method for <emph type="ital">in vitro</emph> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| ASTM D 7193 : 2017 : R2022 | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 7329 : 2007 : R2024 | Standard Specification for Food Preparation and Food Handling (Food Service) Gloves |
| ASTM C 1775 : 2022 | Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications |
| ASTM D 3981 : 2009 : REV A : R2024 : EDT 1 | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
| ASTM D 5272 : 2008 : R2021 | Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
| ASTM D 1593 : 2022 | Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
| ASTM D 6040 : 2018 : R2023 | Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM E 154/E154M : 2008 : REV A : R2025 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM D 3105 : 2017 : R2024 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 6585 : 2017 : R2022 | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 2673 : 2014 : R2022 | Standard Specification for Oriented Polypropylene Film |
| ASTM D 8195 : 2018 : R2025 | Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting |
| ASTM D 7773 : 2019 | Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO<inf >3</inf>) Using Filter Sampling and Suppressed Ion Chromatography |
| ASTM D 8065/D8065M : 2016 : R2023 | Standard Classification System and Basis for Specification for Specifying Plastic Films |
| ASTM C 877 : 2025 | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
| ASTM G 218 : 2025 | Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection |
| ASTM D 7008 : 2008 : R2022 | Standard Specification for Geosynthetic Alternate Daily Covers |
| ASTM D 2671 : 2021 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| ASTM E 1745 : 2017 : R2023 | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM D 4635 : 2025 | Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
| ASTM F 665 : 2009 : R2024 | Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application |
| ASTM D 1938 : 2019 | Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
| ASTM E 2556/E2556M : 2010 : R2022 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM E 2831/E2831M : 2011 : R2025 | Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places |
| ASTM C 877M : 2021 | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric) |
| ASTM D 6495/D6495M : 2018 : R2022 | Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners |
| ASTM D 5889/D5889M : 2018 : R2022 | Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 3595 : 2025 | Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Film |
| ASTM D 3826 : 2018 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
| ASTM D 5747/D5747M : 2021 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 1239 : 2022 : REV A | Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
| ASTM E 2639 : 2012 : R2025 | Standard Test Method for Blast Resistance of Trash Receptacles |
| ASTM D 7106/D7106M : 2025 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 1004 : 2021 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 2305 : 2018 | Standard Test Methods for Polymeric Films Used for Electrical Insulation |
| ASTM F 1921/F1921M : 2012 : R2023 | Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
| ASTM C 1916 : 2021 | Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation |
| ASTM F 3510 : 2021 | Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products |
| ASTM D 7408 : 2012 : R2020 | Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
| ASTM F 412 : 2025 : REV A | Standard Terminology Relating to Plastic Piping Systems |
| ASTM D 2370 : 2016 : R2021 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM D 5071 : 2006 : R2021 | Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
| ASTM D 6287 : 2025 | Standard Practice for Cutting Film and Sheeting Test Specimens |
| ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 2103 : 2023 : REV A | Standard Specification for Polyethylene Film |
| ASTM G 21 : 2015 : R2021 : EDT 1 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM E 2771 : 2024 | Standard Terminology for Homeland Security Applications |
| ASTM D 6324 : 2011 : R2023 | Standard Specification for Male Condoms Made from Polyurethane |
| ASTM D 7176 : 2022 | Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications |
| ASTM D 6214/D6214M : 2023 | Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM F 3708 : 2025 | Standard Specification for Aramid Fiber Reinforced Flexible Fabric-Reinforced Pipe (FFRP) for Loose-fit Non-Interactive Pressure Pipeline Rehabilitation |
| ASTM A 674 : 2022 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe |
| ASTM F 2150 : 2019 | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
| ASTM D 4093 : 2023 | Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials |
| ASTM D 5459 : 1995 : R2025 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
| ASTM D 3308 : 2012 : R2022 | Standard Specification for PTFE Resin Skived Tape |
| ASTM F 2097 : 2025 | Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products |
| ASTM E 2740 : 2012 : R2025 | Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing |
| ASTM C 1136 : 2023 | Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation |
| ASTM D 4885 : 2001 : R2023 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 5083 : 2026 | Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
| ASTM D 3759/D3759M : 2005 : R2025 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
| ASTM D 7272 : 2006 : R2023 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 4397 : 2016 : R2023 | Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
| ASTM D 3368 : 2017 : R2022 | Standard Specification for FEP Sheet and Film |
| ASTM D 4649 : 2020 : R2025 | Standard Guide for Use of Stretch Films and Wrapping Application |
| ASTM F 88/F88M : 2023 | Standard Test Method for Seal Strength of Flexible Barrier Materials |
| ASTM D 883 : 2026 | Standard Terminology Relating to Plastics |
Important note : Users cannot be edited or removed once added to your Multi user PDF.