ASTM D 926 : 2017 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
English
14-11-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 09.01, 2017 Specifies the determination of plasticity and recovery of unvulcanized rubber by means of the parallel plate plastometer.
| Committee |
D 11
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of plasticity and recovery of unvulcanized rubber by means of the parallel plate plastometer. Uncompounded, compounded, and reclaim rubber may be tested.
Note 1:ISO 2007 and Test Method D3194 use a principle similar to this test method although the apparatus, test conditions, and procedure are different.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ZZ E 00661 : F (1) NOTICE 2 | ERASERS, RUBBER AND RUBBER SUBSTITUTE |
| ASTM F 2042 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| ASTM D 6049 : 2003 : R2008 | Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM D 6049 : 2003 : R2013 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM F 2042 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| UNE 53521:2015 | Elastomers. Determination of plasticity of the raw rubbers and their unvulcanized compounds. |
| ASTM D 3157 : 2005 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 3157 : 2005 : R2010 : EDT 1 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 6049 : 2003 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM F 2042 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
| ASTM D 6049 : 2003 : R2017 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM F 604 : 1994 | Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001) |
| ASTM F 2042 : 2000 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| ASTM D 3157 : 2005 : R2015 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 3194 : 2017 : REDLINE | Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI) |
| ISO 2007:2007 | Rubber, unvulcanized Determination of plasticity Rapid-plastimeter method |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.