ASTM E 101 : 1991
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)
Hardcopy , PDF
01-10-1996
English
31-12-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL 03.05 1997 Outlines the spectrographic analysis of aluminum and aluminum alloys.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
1.1 This test method covers the spectrographic analysis of aluminum and aluminum alloys for the following elements in the ranges indicated:
Element Concentration Range, % Silicon 0.02 to 14.0 Copper 0.001 to 10.0 Magnesium 0.001 to 10.0 Zinc 0.03 to 8.0 Nickel 0.03 to 3.0 Iron 0.02 to 2.0 Manganese 0.005 to 2.0 Lead 0.03 to 0.7 Bismuth 0.03 to 0.7 Chromium 0.01 to 0.5 Titanium 0.01 to 0.5 Tin 0.01 to 0.5 Beryllium 0.0002 to 0.5 Calcium 0.0005 to 0.1 Sodium 0.0005 to 0.051.2 This test method is applicable primarily to the analysis of chill-cast disks, but it may be extended, with proper precautions, to the analysis of samples in other forms on which a flat surface for sparking can be machined. Standards and samples should be of similar composition and metallurgical state; when they are not, corrections must be applied to compensate for these effects.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM A 676 : 72(1980) | SPECIFICATION FOR HOT-DIPPED ALUMINUM COATINGS ON FERROUS ARTICLES |
| ASTM B 531 : 1990 : R1998 : EDT 1 | Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn 2003) |
| MIL A 46192 : B | ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
| MIL A 45225 : E | ALUMINUM ALLOY ARMOR, FORGED |
| STANAG 4300 : 0 | TEST PROCEDURES FOR ASSESSING THE QUALITY OF ALUMINIUM POWDER, FOR USE IN EXPLOSIVE FORMULATION, FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER |
| SAE AMS4223E | Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged |
| SAE AMS4235C | Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7) Solution and Precipitation Heat Treated |
| ASTM F 901 : 2001 : R2012 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM F 468M:2006 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
| ASTM F 901 : 2001 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM B 85 : 2003 | Standard Specification for Aluminum-Alloy Die Castings |
| ASTM F 467M : 2006 : REV A : EDT 1 | Standard Specification for Nonferrous Nuts for General Use [Metric] |
| ASTM F 468M : 2006 : R2018 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
| ASTM F 901 : 2020 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM F 467M : 2006 : REV A : R2018 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
| ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM F 467 : 2013 : R2018 | Standard Specification for Nonferrous Nuts for General Use |
| ASTM F 468M : 2006 : R2012 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
| ASTM F 468M : 2006 : EDT 1 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
| ASTM F 467M : 2006 : REV A : R2012 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
| ASTM F 901 : 2001 : R2007 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM F 901 : 2001 : R2017 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM B 313M : 1988 | Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990) |
| ASTM F 467M : 2006 : REV A : EDT 2 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
| MIL A 512 : A | ALUMINUM POWDER, FLAKED, GRAINED AND ATOMIZED |
| MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
| SAE AMS4242C | Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged |
| ASTM B 308M : 1988 | Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990) |
| ASTM E 116 : 1997 | Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002) |
| ASTM E 716 : 2016 : REDLINE | Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry |
| ASTM E 115 : 1997 | Standard Practice for Photographic Processing in Optical Emission Spectrographic Analysis (Withdrawn 2002) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.