ASTM E 1012 : 2019
Current
Current
The latest, up-to-date edition.
Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
13-03-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 28
|
| DocumentType |
Standard Practice
|
| Pages |
17
|
| ProductNote |
THIS STANDARD IS ALSO REFERS TO VAMAS Guide 42
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1Included in this practice are methods covering the determination of the amount of bending that occurs during the application of tensile and compressive forces to notched and unnotched test specimens during routine testing in the elastic range. These methods are particularly applicable to the force levels normally used for tension testing, compression testing, creep testing, and uniaxial fatigue testing. The principal objective of this practice is to assess the amount of bending exerted upon a test specimen by the ordinary components assembled into a materials testing machine, during routine tests.
1.2This practice is valid for metallic and nonmetallic testing.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1275 : 2018 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| ASTM F 1160 : 2014 : R2017 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM E 2789 : 2010 : R2015 | Standard Guide for Fretting Fatigue Testing |
| ASTM C 1360 : 2017 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1819 : 2015 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
| ASTM B 557 : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM D 7337/D7337M : 2012 : R2019 | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM C 364/C364M : 2016 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
| ASTM E 2714 : 2013 | Standard Test Method for Creep-Fatigue Testing |
| ASTM C 1337 : 2017 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
| ASTM D 3552 : 2017 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
| ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
| ASTM E 466 : 2015 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| ASTM C 1366 : 2019 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM D 3479/D3479M : 2019 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
| ASTM D 7205/D7205M : 2006 : R2016 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM C 1361 : 2010 : R2019 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM C 1863 : 2018 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
| ASTM C 1869 : 2018 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
| ASTM E 74 : 2018 : EDT 1 | Standard Practices for Calibration and Verification for Force-Measuring Instruments |
| ASTM C 1773 : 2017 | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
| ASTM E 328 : 2013 | Standard Test Methods for Stress Relaxation Tests for Materials and Structures |
| ASTM C 1291 : 2018 | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
| ASTM C 1468 : 2019 : REV A | Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature |
| ASTM E 132 : 2017 | Standard Test Method for Poisson’s Ratio at Room Temperature |
| ASTM C 1359 : 2018 : EDT 1 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM C 1273 : 2018 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
| ASTM E 2899 : 2019 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
| ASTM E 1450 : 2016 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM E 647 : 2015 : EDT 1 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| ASTM E 143 : 2013 | Standard Test Method for Shear Modulus at Room Temperature |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
| ASTM E 139 : 2011 : R2018 | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
| ASTM D 7291/D7291M : 2015 | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| ASTM F 1801 : 1997 : R2014 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
| ASTM E 1856 : 2013 | Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
| ASTM C 1424 : 2015 : R2019 | Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature |
| ASTM C 394/C394M : 2016 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
| ASTM E 2368 : 2010 : R2017 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| ASTM E 111 : 2017 | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| ASTM C 1358 : 2018 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures |
| ASTM E 2207 : 2015 | Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
| ASTM B 557M : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| AS 1391:2020 | Metallic materials - Tensile testing - Method of test at room temperature |
| ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
| ASTM E 606 : 1992 : R1998 | Standard Practice for Strain-Controlled Fatigue Testing |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 83 : 2016 | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM E 83 : 1998 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
| ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 466 : 1996 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 466 : 2021 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 9 : 1989 : REV A : R1995 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.