ASTM E 1025 : 2018 : R2025
Current
The latest, up-to-date edition.
Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
English
01-09-2025
| Committee |
E 07
|
| DocumentType |
Standard Practice
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice2 covers the design, material grouping classification, and manufacture of hole-type image quality indicators (IQI) used to indicate the quality of radiologic images.
1.2This practice is applicable to X-ray and gamma-ray radiology.
1.3The values stated in inch-pound units are to be regarded as standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2033/E2033M : 2024 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| ASTM E 1000 : 2024 | Standard Guide for Radioscopy |
| ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 1647 : 2016 : R2022 | Standard Practice for Determining Contrast Sensitivity in Radiology |
| ASTM E 1817 : 2008 : R2022 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
| ASTM E 3388 : 2023 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy for High Energy Applications |
| ASTM E 2737 : 2023 | Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
| ASTM E 3166 : 2020 : EDT 1 | Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build |
| ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
| ASTM E 3030 : 2025 | Standard Digital Reference Images for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| ASTM E 1742/E1742M : 2023 | Standard Practice for Radiographic Examination |
| ASTM E 839 : 2023 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
| ASTM E 1030/E1030M : 2021 | Standard Practice for Radiographic Examination of Metallic Castings |
| ASTM E 1411 : 2023 | Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 746 : 2023 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV |
| ASTM D 8093 : 2019 | Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite |
| ASTM E 1931 : 2016 : R2022 | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 2104 : 2022 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM E 592 : 2020 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates <fraction><num>1</num><den>4 </den> </fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60 |
| ASTM F 629 : 2024 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
| ASTM E 1735 : 2019 : R2024 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV |
| ASTM E 747 : 2024 | Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiography |
| ASTM E 1255 : 2023 | Standard Practice for Radioscopy |
| ASTM E 1165 : 2020 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| ASTM E 2002 : 2022 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 3505 : 2025 | Standard Practice for Direct Determination of Computed Tomography (CT) Detail Detection Sensitivity and Calculation of Numerical Detection Limit |
| ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 192 : 2020 | Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications |
| ASTM E 2662 : 2015 : R2022 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 1416 : 2023 | Standard Practice for Radioscopic Examination of Weldments |
| ASTM E 1734 : 2023 | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1032 : 2025 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
| ASTM F 3704/F3704M : 2024 | Standard Practice for Nondestructive Testing (NDT), Inspection Levels and Acceptance Criteria for Parts Manufactured with Laser Based Powder Fusion |
| ASTM E 2007 : 2010 : R2023 | Standard Guide for Computed Radiography |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.