![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 1142 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Thermophysical Properties
15-05-2021
English
01-05-2015
CONTAINED IN VOL. 14.02, 2015 Deals with terms and corresponding definitions commonly used in the study of thermophysical properties.
Committee |
E 37
|
DocumentType |
Redline
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
1.1This is a compilation of terms and corresponding definitions commonly used in the study of thermophysical properties. Terms that are generally understood or defined adequately in other readily available sources are either not included or their sources identified.
1.2A definition is a single sentence with additional information included in a Discussion.
1.3Definitions of terms specific to a particular field (such as dynamic mechanical measurements) are identified with an italicized introductory phrase.
ASTM E 2403 : 2006 : R2012 | Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry |
ASTM E 3007 : 2015 | Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry |
ASTM E 228 : 2017 : REDLINE | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
ASTM E 2509 : 2014 : REDLINE | Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode |
ASTM E 2716 : 2009 | Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry |
ASTM D 6382/D6382M : 1999 : R2011 : EDT 1 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM E 2071 : 2000 : R2010 | Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data |
ASTM D 6382 : 1999 : R2005 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM E 2071 : 2000 : R2015 | Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data |
ASTM E 2425 : 2016 : REDLINE | Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers |
ASTM E 2161 : 2015 : REDLINE | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
ASTM E 2071 : 2000 : R2005 | Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data |
ASTM E 1868 : 2010 | Standard Test Method for Loss-On-Drying by Thermogravimetry |
ASTM E 1953 : 2014 : REDLINE | Standard Practice for Description of Thermal Analysis and Rheology Apparatus |
ASTM E 2890 : 2012 : EDT 1 | Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method |
ASTM E 968 : 2002 : R2008 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
ASTM E 2781 : 2016 : REDLINE | Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry |
ASTM E 2602 : 2009 : R2015 | Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry |
ASTM E 3116 : 2018 | Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers |
ASTM E 2603 : 2015 : REDLINE | Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters |
ASTM D 6382 : 1999 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM F 1925 : 2017 : REDLINE | Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
ASTM E 1131 : 2008 : R2014 | Standard Test Method for Compositional Analysis by Thermogravimetry |
ASTM E 2402 : 2011 | Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers |
ASTM E 1356 : 2008 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
ASTM E 2602 : 2009 | Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry |
ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
ASTM E 1356 : 2008 : R2014 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023) |
ASTM E 1545 : 2011 | Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
ASTM E 968 : 2002 : R2014 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Withdrawn 2023) |
ASTM E 2550 : 2017 : REDLINE | Standard Test Method for Thermal Stability by Thermogravimetry |
ASTM E 1868 : 2010 : R2015 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
ASTM E 2347 : 2016 : REDLINE | Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis |
ASTM E 2160 : 2004 | Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry |
ASTM E 2040 : 2008 : R2014 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM D 7426 : 2008 : R2013 | Standard Test Method for Assignment of the DSC Procedure for Determining T<inf>g</inf > of a Polymer or an Elastomeric Compound (Withdrawn 2022) |
ASTM E 794 : 2006 | Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis |
ASTM E 793 : 2006 | Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry |
ASTM E 794 : 2006 : R2012 | Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis |
ASTM E 2038 : 1999 : R2004 | Standard Test Method for Temperature Calibration of Dielectric Analyzers (Withdrawn 2009) |
ASTM E 289 : 2017 : REDLINE | Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry |
ASTM E 2253 : 2016 : REDLINE | Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters |
ASTM E 1782 : 2014 : REDLINE | Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
ASTM D 6382/D6382M : 1999 : R2017 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM E 1640 : 2013 : R2018 | Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis |
ASTM E 793 : 2006 : R2012 | Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry |
ASTM E 2038 : 1999 | Standard Test Method for Temperature Calibration of Dielectric Analyzers |
ASTM E 2039 : 2004 | Standard Test Method for Determining and Reporting Dynamic Dielectric Properties (Withdrawn 2009) |
ASTM E 2403 : 2006 | Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry |
CSA S806: 2012 | DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
ASTM E 2918 : 2013 | Standard Test Method for Performance Validation of Thermomechanical Analyzers |
STANAG 4515 : 2015 | EXPLOSIVES, THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA), DIFFERENTIAL SCANNING CALORIMETRY (DSC), HEAT FLOW CALORIMETRY (HFC), AND THERMOGRAVIMETRIC ANALYSIS (TGA) |
ASTM E 968 : 2002 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
ASTM E 3142 : 2018 | Standard Test Method for Thermal Lag of Thermal Analysis Apparatus |
ASTM E 2510 : 2007 | Standard Test Method for Torque Calibration or Conformance of Rheometers |
ASTM E 1582 : 2017 : REDLINE | Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers |
ASTM E 2510 : 2007 : R2013 | Standard Test Method for Torque Calibration or Conformance of Rheometers |
ASTM E 2890 : 2012 | Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method |
ASTM E 1530 : 2011 | Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
ASTM E 2206 : 2011 : R2015 | Standard Test Method for Force Calibration of Thermomechanical Analyzers |
ASTM E 2958 : 2014 | Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry |
ASTM E 2206 : 2011 | Standard Test Method for Force Calibration of Thermomechanical Analyzers |
ASTM E 1640 : 2013 | Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis |
ASTM E 1131 : 2008 | Standard Test Method for Compositional Analysis by Thermogravimetry |
ASTM E 2160 : 2004 : R2012 | Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry |
ASTM E 1952 : 2017 : REDLINE | Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry |
ASTM C 1470 : 2006 : R2013 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM E 2040 : 2008 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM E 967 : 2018 : REDLINE | Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers |
ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM E 2071 : 2000 | Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data |
ASTM C 1872 : 2018 | Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement |
ASTM E 2402 : 2011 : R2017 | Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers |
ASTM E 2008 : 2017 : REDLINE | Standard Test Methods for Volatility Rate by Thermogravimetry |
ASTM E 1545 : 2011 : R2016 | Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis |
ASTM D 7426 : 2008 | Standard Test Method for Assignment of the DSC Procedure for Determining T<sub>g</sub> of a Polymer or an Elastomeric Compound |
ASTM C 1470 : 2006 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM E 2716 : 2009 : R2014 | Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry |
ASTM E 2041 : 2013 : EDT 1 | Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method |
ASTM E 1530 : 2011 : R2016 | Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
ASTM E 7 : 2017 : REDLINE | Standard Terminology Relating to Metallography |
ASTM E 344 : 2016-12 | TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.