ASTM E 1237 : 1993 : R2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Installing Bonded Resistance Strain Gages
Hardcopy , PDF
11-11-2014
English
01-04-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.01, 2015 Gives guidelines for installing bonded resistance strain gages.
| Committee |
E 28
|
| DocumentType |
Guide
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2009
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This guide provides guidelines for installing bonded resistance strain gages. It is not intended to be used for bulk or diffused semiconductor gages. This document pertains only to adhesively bonded strain gages.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6416/D6416M : 2016 | Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
| ASTM D 4255/D4255M : 2015 : REV A | Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| ASTM D 5450/D5450M : 2016 | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 7078/D7078M : 2012 | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
| ASTM D 5379/D5379M : 2012 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM E 251 : 1992 : R2014 | Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
| ASTM D 6856/D6856M : 2003 : R2016 | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
| ASTM D 7248/D7248M : 2012 : R2017 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| ASTM D 5687/D5687M : 1995 : R2015 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| ASTM D 3410/D3410M : 2016 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| ASTM D 5449/D5449M : 2016 | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM E 1426 : 2014 | Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques |
| ASTM E 1949 : 2003 : R2014 : EDT 1 | Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages |
| ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM E 1012 : 2014 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 5448/D5448M : 2016 | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.