ASTM E 1251 : 1994 : R1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
Hardcopy , PDF
11-11-2014
English
10-06-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method provides for the optical emission spectrometric analysis of aluminum and aluminum alloys, in cast or wrought form, for the following elements in the concentration ranges indicated:
Element Concentration, Range, % Silicon 0.001 to 24.0 Copper 0.001 to 20.0 Magnesium 0.001 to 11.0 Zinc 0.001 to 10.0 Tin 0.001 to 7.5 Nickel 0.001 to 4.0 Iron 0.001 to 3.5 Lithium 0.005 to 3.0 Manganese 0.001 to 2.0 Cobalt 0.001 to 2.0 Silver 0.001 to 1.5 Chromium 0.001 to 1.0 Zirconium 0.001 to 1.0 Lead 0.002 to 0.7 Bismuth 0.001 to 0.7 Cadmium 0.001 to 0.5 Beryllium 0.0001 to 0.5 Titanium 0.001 to 0.5 Antimony 0.001 to 0.5 Vanadium 0.001 to 0.15 Strontium 0.0001 to 0.07 Gallium 0.001 to 0.05 Sodium 0.0001 to 0.05 Boron 0.0001 to 0.05 Barium 0.0001 to 0.05 Calcium 0.001 to 0.05 Phosphorus 0.0001 to 0.011.2 This test method is suitable primarily for the control analysis of chill-cast specimens. Other forms may be analyzed, provided that (1) they are sufficiently massive to prevent undue heating, (2) they permit machining flat surfaces having a minimum diameter of approximately 15 mm, and (3) reference materials of similar metallurgical condition and chemical composition are available.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard statements are given in 8.2 and Section 10.
| ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM B 491/B491M : 2015 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 985 : 2012 : R2016 | Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis |
| ASTM B 969/B969M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes |
| ASTM B 955/B955M : 2018 | Standard Specification for Aluminum-Alloy Centrifugal Castings |
| ASTM B 618/B618M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Investment Castings |
| ASTM B 179 : 2018 | Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes |
| ASTM B 373 : 2019 | Standard Specification for Aluminum Foil for Capacitors |
| ASTM B 26/B26M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Sand Castings |
| ASTM B 108/B108M : 2018 : EDT 1 | Standard Specification for Aluminum-Alloy Permanent Mold Castings |
| ASTM B 37 : 2018 | Standard Specification for Aluminum for Use in Iron and Steel Manufacture |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B 221M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM B 234M : 2017 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| ASTM B 209 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 247 : 2015 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 247M : 2015 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| ASTM B 210/B210M : 2019 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
| ASTM B 928/B928M : 2015 | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM B 211/B211M : 2019 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| ASTM B 686/B686M : 2018 | Standard Specification for Aluminum Alloy Castings, High-Strength |
| ASTM B 241/B241M : 2016 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM B 327 : 2016 | Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ASTM B 234 : 2017 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| ASTM B 316/B316M : 2015 | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM E 716 : 2016 | Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| ASTM B 209M : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) (Withdrawn 2021) |
| ASTM B 221 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 479 : 2019 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.