ASTM E 1272 : 2002 : R2024
Current
The latest, up-to-date edition.
Standard Specification for Laboratory Glass Graduated Cylinders
Hardcopy , PDF
English
01-11-2024
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 41
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers requirements for glass graduated cylinders for precision and general purpose grades suitable for laboratory purposes.
1.1.1Class A—Each cylinder of precision grade shall be marked with the letter “A” to signify compliance with applicable construction and accuracy requirements. Cylinders may be marked with an identification number (serial number) at the option of the manufacturer.
1.1.2Class B—General purpose cylinders are of the same basic design as Class A cylinders. However, volumetric tolerances for Class B cylinders shall be within twice the specified range allowed for Class A cylinders. These cylinders need not be marked with their class designation.
1.1.3Product with a stated capacity not listed in this standard may be specified in Class A tolerance when product conforms to the tolerance range of the next smaller volumetric standard product listed in Table 1.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7603 : 2023 | Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils |
| ASTM D 4180 : 2023 | Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers |
| ASTM D 6082 : 2023 | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
| ASTM D 4438 : 2024 | Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
| ASTM E 133 : 1992 : R2022 | Standard Specification for Distillation Equipment |
| ASTM C 940 : 2022 | Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM D 4164 : 2024 | Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers |
| ASTM D 5153 : 2022 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry |
| ASTM D 4512 : 2022 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
| ASTM D 892 : 2023 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
| ASTM D 7563 : 2023 | Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
| ASTM D 86 : 2023 : REV A : EDT 2 | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
| ASTM D 7569/D7569M : 2024 | Standard Practice for Determination of Gas in Coal—Direct Desorption Method |
| ASTM D 3838 : 2023 | Standard Test Method for pH of Activated Carbon |
| ASTM D 8293 : 2022 | Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements |
| ASTM D 4781 : 2024 | Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
| ASTM D 8413 : 2022 | Standard Guide for Measuring the Water Pore Volume of Catalytic Materials by Centrifuge |
| ASTM D 4699 : 2023 | Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles |
| ASTM E 694 : 2018 : R2024 | Standard Specification for Laboratory Glass Volumetric Apparatus |
| ASTM C 1770 : 2021 | Standard Test Method for Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide |
| ASTM D 7442 : 2022 | Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.