|
ASTM E 932 : 1989 : R2021
|
Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers |
|
ASTM E 1865 : 1997 : R2021
|
Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air |
|
ASTM D 6122 : 2022
|
Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
|
ASTM E 2056 : 2004 : R2016
|
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures |
|
ASTM E 1653 : 1994 : R2021
|
Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides |
|
ASTM D 8321 : 2022
|
Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements |
|
ASTM E 2193 : 2016
|
Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
|
ASTM E 1458 : 2012 : R2022
|
Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
|
ASTM D 7412 : 2022
|
Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM D 8340 : 2022
|
Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems |
|
ASTM D 5831 : 2017
|
Standard Practice for Screening Fuels in Soils |
|
ASTM D 3124 : 1998 : R2019
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
|
ASTM E 2617 : 2017
|
Standard Practice for Validation of Empirically Derived Multivariate Calibrations |
|
ASTM E 334 : 2001 : R2021
|
Standard Practice for General Techniques of Infrared Microanalysis |
|
ASTM E 1791 : 1996 : R2021
|
Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry |
|
ASTM D 7686 : 2019
|
Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument |
|
ASTM D 7414 : 2022
|
Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM D 2269 : 2010 : R2020
|
Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption |
|
ASTM D 2702 : 2005 : R2021
|
Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics |
|
ASTM E 275 : 2008 : R2022
|
Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
|
ASTM D 7418 : 2022
|
Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring |
|
ASTM E 1421 : 1999 : R2021
|
Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests |
|
ASTM D 3288/D3288M : 2020
|
Standard Test Methods for Magnet-Wire Enamels |
|
ASTM E 2106 : 2000 : R2019
|
Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses |
|
ASTM E 1866 : 1997 : R2021
|
Standard Guide for Establishing Spectrophotometer Performance Tests |
|
ASTM D 7806 : 2020
|
Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method) |
|
ASTM E 2642 : 2009 : R2021
|
Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors |
|
ASTM D 6748 : 2022
|
Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
|
ASTM E 1655 : 2017
|
Standard Practices for Infrared Multivariate Quantitative Analysis |
|
ASTM D 6953 : 2018
|
Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) |
|
ASTM E 573 : 2001 : R2021
|
Standard Practices for Internal Reflection Spectroscopy |
|
ASTM E 2412 : 2010 : R2018
|
Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM D 6042 : 2009 : R2016
|
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
|
ASTM D 7399 : 2018
|
Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry |
|
ASTM D 5227 : 2021
|
Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
|
ASTM D 2330 : 2020
|
Standard Test Method for Methylene Blue Active Substances |
|
ASTM E 1982 : 1998 : R2021
|
Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air |
|
ASTM E 2224 : 2019
|
Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy |
|
ASTM E 1790 : 2004 : R2016 : EDT 1
|
Standard Practice for Near Infrared Qualitative Analysis |
|
ASTM D 6258 : 2017
|
Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
|
ASTM D 2621 : 1987 : R2016
|
Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints |
|
ASTM F 3294 : 2018
|
Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy |
|
ASTM D 6645 : 2018
|
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
|
ASTM D 3048 : 1989 : R2016
|
Standard Test Method of Assay for Alkaline Protease |
|
ASTM E 2105 : 2000 : R2016
|
Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) |
|
ASTM E 2529 : 2006 : R2022
|
Standard Guide for Testing the Resolution of a Raman Spectrometer |
|
ASTM D 7588 : 2011 : R2018
|
Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container |
|
ASTM D 5086 : 2020
|
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
|
ASTM E 2719 : 2009 : R2022
|
Standard Guide for Fluorescence—Instrument Calibration and Qualification |
|
ASTM E 1642 : 2000 : R2016
|
Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
|
ASTM E 169 : 2016 : R2022
|
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis |
|
ASTM E 1184 : 2021
|
Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM D 7210 : 2021
|
Standard Practice for Extraction of Additives in Polyolefin Plastics |
|
ASTM D 6342 : 2022
|
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
|
ASTM D 5576 : 2000 : R2021 : EDT 1
|
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
|
ASTM D 1278 : 1991 : REV A : R2020
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
|
ASTM E 2977 : 2015
|
Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples |
|
ASTM E 1732 : 2022
|
Standard Terminology Relating to Forensic Science |
|
ASTM D 2008 : 2012 : R2018
|
Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products |
|
ASTM D 7624 : 2022
|
Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM E 1840 : 1996 : R2022
|
Standard Guide for Raman Shift Standards for Spectrometer Calibration |
|
ASTM E 284 : 2022
|
Standard Terminology of Appearance |
|
ASTM D 1840 : 2007 : R2017
|
Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
|
ASTM D 7415 : 2022
|
Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM E 60 : 2011 : R2022 : EDT 1
|
Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
|
ASTM D 5594 : 2018 : REV A
|
Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
|
ASTM E 1683 : 2002 : R2022
|
Standard Practice for Testing the Performance of Scanning Raman Spectrometers |
|
ASTM E 1252 : 1998 : R2021
|
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
|
ASTM D 4763 : 2006 : R2020
|
Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
|
ASTM D 8470 : 2022
|
Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems |
|
ASTM D 7889 : 2021
|
Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy |
|
ASTM D 5477 : 2018
|
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
|
ASTM D 5412 : 1993 : R2017 : EDT 1
|
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
|
ASTM E 2310 : 2004 : R2015
|
Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy |
|
ASTM E 387 : 2004 : R2022
|
Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
|
ASTM E 2937 : 2018
|
Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations |
|
ASTM E 3085 : 2017
|
Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations |
|
ASTM E 2143 : 2001 : R2021
|
Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons |
|
ASTM E 3323 : 2022
|
Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD) |
|
ASTM D 6248 : 2021
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
|
ASTM D 7214 : 2022
|
Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation |
|
ASTM D 2238 : 2022
|
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1 |
|
ASTM D 7844 : 2022 : REV A
|
Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry |
|
ASTM D 2144 : 2007 : R2021
|
Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption |
|
ASTM E 3297 : 2021
|
Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with a Charged Aerosol Detector (CAD) |
|
ASTM D 297 : 2021
|
Standard Test Methods for Rubber Products—Chemical Analysis |
|
ASTM E 925 : 2009 : R2022
|
Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
|
ASTM E 1944 : 1998 : R2021
|
Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests |