ASTM E 1447 : 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
Hardcopy , PDF
11-11-2014
English
01-03-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.05, 2016 Pertains to the determination of hydrogen in titanium and titanium alloys in concentrations from 0.0006% to 0.0260%.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2009
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method applies to the determination of hydrogen in titanium and titanium alloys in concentrations from 0.0006 % to 0.0260 %.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards, see Section 9.
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| ASTM B 338 : 2017 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 348 : 2013 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM B 988 : 2018 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM F 1295 : 2016 | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B 1009 : 2018 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM B 265 : 2015 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM F 2146 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM F 2989 : 2013 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM F 2063 : 2018 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM F 1108 : 2014 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM B 863 : 2014 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM B 381 : 2013 : R2019 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 2066 : 2018 | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM B 861 : 2014 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM F 3001 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 136 : 2013 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM A 1001 : 2018 | Standard Specification for High-Strength Steel Castings in Heavy Sections |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM F 2885 : 2017 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM F 1472 : 2014 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM B 862 : 2014 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 977 : 2013 | Standard Specification for Titanium and Titanium Ingots |
| ASTM B 299/B299M : 2018 | Standard Specification for Titanium Sponge |
| ASTM F 1813 : 2013 | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM C 696 : 2011 : REDLINE | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.