ASTM E 1497 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids
Hardcopy , PDF
20-04-2023
English
19-10-2017
This practice sets forth guidelines for the selection and safe use of metal removal fluids, additives, and antimicrobials
Committee |
E 34
|
DocumentType |
Standard Practice
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice sets forth guidelines for the selection and safe use of metal removal fluids, additives, and antimicrobials. This includes product selection, storage, dispensing, and maintenance.
1.2Water-miscible metal removal fluids are typically used at high dilution, and dilution rates vary widely. Additionally, there is potential for exposure to undiluted metal removal fluid as manufactured, as well as metal removal fluid additives and antimicrobials.
1.3Straight oils generally consist of a severely solvent-refined or hydro-treated petroleum oil, a synthetic oil, or other oils of animal or vegetable origin, including oils that are modified for performance characteristics (for example, esterified rapeseed oil, and so forth). Straight oils are not intended to be diluted with water prior to use. Additives are often included in straight oil formulations.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2657 : 2016 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2657 : 2021 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2693 : 2019 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2694 : 2021 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 2694 : 2016 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2523 : 2013 : R2018 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 1972 : 1998 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
ASTM E 2169 : 2001 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2003 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1542 : 2010 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1972 : 2004 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
ASTM E 1542 : 1993 : R2004 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2144 : 2021 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2021 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2144 : 2001 : R2007 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2020 : REV A | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
ASTM E 2148 : 2011 : REV A | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2148 : 2006 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 1972 : 2004 : R2011 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment (Withdrawn 2017) |
ASTM E 1302 : 2012 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2019 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2148 : 2001 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2889 : 2012 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 2144 : 2001 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2020 : REV B | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2020 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1302 : 2000 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1542 : 1993 : R1998 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2148 : 2003 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2275 : 2003 : R2008 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2169 : 2022 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2013 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1302 : 2000 : R2007 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2003 : EDT 1 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2148 : 2011 : REV B | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 1302 : 2013 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2144 : 2011 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 2169 : 2001 : R2007 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2012 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2014 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 7049 : 2004 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
ASTM E 2148 : 2021 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM D 7049 : 2004 : R2010 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.