ASTM E 1555 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
Hardcopy , PDF
14-10-2020
English
01-11-2012
Committee |
E 06
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification defines those characteristics that are required of adhesives to be used in the repair of sandwich panels for durable, rigidwall, relocatable structures.
1.1.1This specification covers two-part epoxy adhesive suitable for bonding aluminum alloy facings to nonmetallic core, core to core, and core to perimeter aluminum extrusion frame in the repair of durable rigidwall relocatable structures. The adhesive shall be suitable for forming bonds that will withstand exposure to temperatures from −54 to 93°C (−65 to 199°F) and high relative humidity and will also withstand the combinations of stress, temperature, and relative humidity that are expected to be encountered in service. The adhesive shall also be suitable for the bonding of panel inserts and edge attachments.
1.2The values stated in SI units are to be regarded as the standard where only SI units are given, or where SI units are given first followed by inch-pound units; where inch-pound units are given first followed by SI units, the inch-pound units are to be regarded as the standard.
1.3The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 1749 : 2000 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM D 1002 : 1999 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 1781 : 1998 : R2012 | Standard Test Method for Climbing Drum Peel for Adhesives |
ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 1091 : 2008 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
ASTM D 1002 : 2010 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM E 1091 : 2013 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
ASTM D 2919 : 2000 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
ASTM D 1002 : 2005 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 1781 : 1998 | Standard Test Method for Climbing Drum Peel for Adhesives |
ASTM D 2919 : 2001 : R2014 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
ASTM D 1002 : 2010 : R2019 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM E 1749 : 2005 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM D 1002 : 2001 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM E 1091 : 2003 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
ASTM E 1749 : 2010 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM D 2919 : 2001 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
ASTM D 1781 : 1998 : R2004 | Standard Test Method for Climbing Drum Peel for Adhesives |
ASTM D 2919 : 2001 : EDT 1 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
ASTM E 1091 : 1998 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
ASTM D 2919 : 2001 : R2007 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.