ASTM E 171 : 1994 : R1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
Hardcopy , PDF
11-11-2014
English
31-12-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.09, 2009 Defines the standard temperature and humidity for conditioning and testing of materials at nominally ambient conditions.
| Committee |
F 02
|
| DocumentType |
Standard
|
| Pages |
1
|
| ProductNote |
Reconfirmed 1998
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification defines the standard temperature and humidity for conditioning and testing of materials at nominally ambient conditions.
1.2 There are many other temperature and humidity conditions which may be appropriately used to test end use conditions such as freezer, refrigerated or abusive storage. These need to be individually established.
1.3 Temperature and humidity alone are not sufficient to completely define a storage condition. Many other factors may be relevant (such as time, light and atmospheric pressure) which are defined in this specification.
1.4 Only those materials which fall into the general area of flexible packaging materials are included. Many other materials which were included in earlier versions of this specification may also need a definition.
| ASTM D 3121 : 2017 | Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball |
| ASTM F 145 : 1972 : R2016 | Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies |
| ASTM F 924 : 1990 : R2015 | Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings |
| ASTM D 3931 : 2008 : R2015 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
| ASTM C 870 : 2011 : R2017 | Standard Practice for Conditioning of Thermal Insulating Materials |
| ASTM D 4498 : 2007 : R2015 | Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021) |
| ASTM D 5420 : 2021 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| ASTM D 4332 : 2014 | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
| ASTM D 4338 : 1997 : R2016 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 5181 : 2009 : R2017 | Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester |
| ASTM E 681 : 2009 : R2015 | Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
| ASTM F 88/F88M : 2015 | Standard Test Method for Seal Strength of Flexible Barrier Materials |
| ASTM C 271/C271M : 2016 | Standard Test Method for Density of Sandwich Core Materials |
| ASTM D 6463/D6463M : 2006 : R2020 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM F 1921/F1921M : 2012 : R2018 | Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
| ASTM F 392/F392M : 2011 : R2015 | Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability |
| ASTM D 3924 : 2016 : R2019 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 4272/D4272M : 2015 | Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop |
| ASTM C 886 : 1998 : R2015 | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| ASTM G 151 : 2019 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| ASTM F 1670/F1670M : 2017 : REV A | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM C 748 : 2020 | Standard Test Method for Rockwell Hardness of Graphite Materials |
| ASTM C 366/C366M : 2016 | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
| ASTM F 3039 : 2015 | Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration |
| ASTM E 430 : 2019 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM F 1671/F1671M : 2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| ASTM F 1140/F1140M : 2013 : R2020 : EDT 1 | Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages |
| ASTM D 6195 : 2003 : R2019 | Standard Test Methods for Loop Tack |
| ASTM E 648 : 2019 : REV A : EDT 1 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
| ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3808 : 2001 : R2013 | Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
| ASTM C 686 : 2017 | Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
| TAPPI/ANSI T 402 sp:2013 | STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.