Skip to content
Please enter a keyword to search

  • ASTM E 1734 : 2016 : REV A

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Practice for Radioscopic Examination of Castings

    Available format(s):  Hardcopy, PDF

    Superseded date:  30-06-2023

    Language(s):  English

    Published date:  24-01-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This practice covers a uniform procedure for radioscopic examination of castings. Radioscopic examination of weldments can be found in E1416.

    1.2This practice applies only to radioscopic examination in which an image is finally presented on a display screen (monitor) for evaluation. Test part acceptance may be based on a static or dynamic image. The examination results may be recorded for later review. This practice does not apply to fully automated systems in which evaluation is performed automatically by a computer.

    1.3Due to the many complex geometries and part configurations inherent with castings, it is necessary to recognize the potential limitations associated with obtaining complete radioscopic coverage. Consideration shall be given to areas where geometry or part configuration does not allow for complete radioscopic coverage.

    1.4The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

    1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee E 07
    Document Type Standard Practice
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM E 1647 : 2016 Standard Practice for Determining Contrast Sensitivity in Radiology

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 2002 : 2022 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
    ASTM E 1411 : 2001 : R2006 Standard Practice for Qualification of Radioscopic Systems
    ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 2339 : 2004 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 1255 : 2009 Standard Practice for Radioscopy
    ASTM E 1742 : 2000 Standard Practice for Radiographic Examination
    ASTM E 1025 : 2011 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
    ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
    ASTM E 1647 : 2003 Standard Practice for Determining Contrast Sensitivity in Radioscopy
    ASTM E 2339 : 2011 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1475 : 2013 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
    ASTM E 1255 : 1996 Standard Practice for Radioscopy
    ASTM E 543 : 2021 Standard Specification for Agencies Performing Nondestructive Testing
    ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1165 : 2012 : R2017 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
    ASTM E 1475 : 1997 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data
    ASTM E 2339 : 2015 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 1000 : 1998 Standard Guide for Radioscopy
    ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1000 : 2016 Standard Guide for Radioscopy
    ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
    ASTM E 1165:2012 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1025 : 2018 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
    ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
    ASTM E 2002 : 1998 Standard Practice for Determining Total Image Unsharpness in Radiology
    ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
    ASTM E 1416 : 2023 Standard Practice for Radioscopic Examination of Weldments
    ASTM E 1411 : 1995 Standard Practice for Qualification of Radioscopic Systems
    ASTM E 1165 : 1992 : R1996 : EDT 1 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
    ASTM E 1000 : 1998 : R2003 Standard Guide for Radioscopy
    ASTM E 1742 : 2008 : REV A Standard Practice for Radiographic Examination
    ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1416 : 2009 Standard Test Method for Radioscopic Examination of Weldments
    ASTM E 1647 : 2009 Standard Practice for Determining Contrast Sensitivity in Radioscopy
    ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 543 : 2015 Standard Specification for Agencies Performing Nondestructive Testing
    ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
    ASTM E 1416 : 2016 : REV A Standard Practice for Radioscopic Examination of Weldments
    ASTM E 2002 : 1998 : R2003 : EDT 1 Standard Practice for Determining Total Image Unsharpness in Radiology
    ASTM E 2339 : 2008 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 2339 : 2021 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 2903 : 2018 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
    ASTM E 2002 : 1998 : R2009 Standard Practice for Determining Total Image Unsharpness in Radiology
    ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1475 : 2013 : R2018 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
    ASTM E 1453 : 2009 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
    ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
    ASTM E 1025 : 2005 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
    ASTM E 2339 : 2006 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
    ASTM E 1165 : 2020 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1453 : 2014 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
    ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1742 : 2005 Standard Practice for Radiographic Examination
    ASTM E 1416 : 2004 Standard Test Method for Radioscopic Examination of Weldments
    ASTM E 1453 : 1993 : R1996 Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data
    ASTM E 1411 : 2001 Standard Practice for Qualification of Radioscopic Systems
    ASTM E 1025 : 1998 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
    ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 2339 : 2010 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
    ASTM E 1416 : 1996 Standard Test Method for Radioscopic Examination of Weldments
    ASTM E 2903 : 2013 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
    ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1647 : 1998 : REV A Standard Practice for Determining Contrast Sensitivity in Radioscopy
    ASTM E 1411 : 2016 Standard Practice for Qualification of Radioscopic Systems
    ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
    ASTM E 1647 : 2016 Standard Practice for Determining Contrast Sensitivity in Radiology
    ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1416 : 2016 Standard Practice for Radioscopic Examination of Weldments
    ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
    ASTM E 1475 : 2002 : R2008 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
    ASTM E 1411 : 2009 Standard Practice for Qualification of Radioscopic Systems
    ASTM E 2002 : 2015 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
    ASTM E 1000 : 1998 : R2009 Standard Guide for Radioscopy
    ASTM E 1742 : 2006 Standard Practice for Radiographic Examination
    ASTM E 1165 : 1992 : R2002 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1475 : 2002 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data
    ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
    ASTM E 1165 : 2004 : R2010 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1647 : 2016 : R2022 Standard Practice for Determining Contrast Sensitivity in Radiology
    ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
    ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
    ASTM E 1165 : 2004 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
    ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
    ASTM E 1316 : 2023 Standard Terminology for Nondestructive Examinations
    ASTM E 1255 : 2016 Standard Practice for Radioscopy
    ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective