ASTM E 1815 : 2018 : R2023
Current
The latest, up-to-date edition.
Standard Test Method for Classification of Film Systems for Industrial Radiography
Hardcopy , PDF
English
26-06-2023
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 07
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers a procedure for determination of the performance of film systems used for industrial radiography. This test method establishes minimum requirements that correspond to system classes.
1.2This test method is to be used only for direct exposure-type film exposed with lead intensifying screens. The performance of films exposed with fluorescent (light-emitting) intensifying screens cannot be determined accurately by this test method.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 2104 : 2022 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM E 746 : 2018 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems |
| ASTM E 999 : 2020 | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 1735 : 2019 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV |
| ASTM E 592 : 2020 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates <fraction><num>1</num><den>4 </den> </fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60 |
| ASTM E 2981 : 2021 | Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 1032 : 2019 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
| ASTM E 1165 : 2020 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| ASTM E 2002 : 2022 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
| ASTM E 1114 : 2020 | Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources |
| ASTM E 2446 : 2016 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 1742/E1742M : 2018 | Standard Practice for Radiographic Examination |
| ASTM E 242 : 2015 : R2020 | Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
| ASTM E 2662 : 2015 : R2022 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 2736 : 2017 : R2022 | Standard Guide for Digital Detector Array Radiography |
| ASTM E 2903 : 2018 | Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes |
| ASTM E 1161 : 2021 | Standard Practice for Radiographic Examination of Semiconductors and Electronic Components |
| ASTM E 1030/E1030M : 2021 | Standard Practice for Radiographic Examination of Metallic Castings |
| ASTM E 2597/E2597M : 2022 | Standard Practice for Manufacturing Characterization of Digital Detector Arrays |
| ASTM E 1316 : 2024 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2024 | Standard Terminology for <?Pub Dtl?>Nondestructive Examinations |
| ASTM E 1316 : 2023 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2024 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2023 : REV B | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.