![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 1823 : 2024 : REV A
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Fatigue and Fracture Testing
Hardcopy , PDF
English
05-04-2024
Committee |
E 08
|
DocumentType |
Reference Material
|
Pages |
25
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations.
1.2This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1368 : 2018 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature |
ASTM F 2118 : 2014 : R2020 | Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
ASTM F 3574 : 2022 | Standard Test Methods for Sacroiliac Joint Fusion Devices |
ASTM F 1541 : 2017 | Standard Specification and Test Methods for External Skeletal Fixation Devices |
ASTM E 740/E740M : 2023 | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
ASTM D 5592 : 1994 : R2018 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
ASTM E 1304 : 1997 : R2020 | Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
ASTM E 467 : 2021 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM C 1940 : 2024 | Standard Test Method for Critical Mode I Interlaminar Strain Energy Release Rate of (<emph type="ital">G<inf>Ic</inf></emph>) Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM B 646 : 2019 | Standard Practice for Fracture Toughness Testing of Aluminum Alloys |
ASTM D 7779 : 2020 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
ASTM E 2789 : 2010 : R2021 | Standard Guide for Fretting Fatigue Testing |
ASTM F 3140 : 2023 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
ASTM F 384 : 2017 | Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
ASTM E 606/E606M : 2021 | Standard Test Method for Strain-Controlled Fatigue Testing |
ASTM E 2760 : 2019 : EDT 1 | Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 2208 : 2002 : R2018 : EDT 1 | Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems |
ASTM F 519 : 2023 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
ASTM F 1264 : 2016 : EDT 1 | Standard Specification and Test Methods for Intramedullary Fixation Devices |
ASTM F 2346 : 2018 | Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
ASTM D 6873/D6873M : 2023 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
ASTM E 399 : 2023 | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 1922/E1922M : 2022 | Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
ASTM B 929 : 2023 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
ASTM F 2580 : 2018 | Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis |
ASTM E 1221 : 2023 | Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels |
ASTM E 2444 : 2011 : R2018 | Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films |
ASTM D 7615/D7615M : 2023 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
ASTM D 3479/D3479M : 2019 : R2023 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
ASTM D 7313 : 2020 | Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry |
ASTM E 2368 : 2010 : R2017 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 2472 : 2012 : R2018 : EDT 2 | Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM C 1360 : 2017 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM B 593 : 2021 | Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials |
ASTM E 1457 : 2023 | Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM F 2078 : 2022 | Standard Terminology Relating to Hydrogen Embrittlement Testing |
ASTM E 436 : 2003 : R2021 | Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels |
ASTM E 1820 : 2023 : REV B | Standard Test Method for Measurement of Fracture Toughness |
ASTM F 1940 : 2007 : REV A : R2019 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
ASTM F 382 : 2017 | Standard Specification and Test Method for Metallic Bone Plates |
ASTM E 647 : 2023 : REV B | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM G 168 : 2017 | Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens |
ASTM C 1361 : 2010 : R2019 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
ASTM E 1681 : 2023 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM F 3036 : 2021 | Standard Guide for Testing Absorbable Stents |
ASTM F 2502 : 2017 | Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
ASTM E 2818 : 2011(R2019) | Standard Practice for Determination of Quasistatic Fracture Toughness of Welds |
ASTM F 3211 : 2017 | Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
ASTM E 2948 : 2022 | Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
ASTM F 3210 : 2022 : EDT 1 | Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
ASTM F 2789 : 2010 : R2020 | Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
ASTM C 1576 : 2005 : R2017 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature |
ASTM E 3039 : 2020 | Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens |
ASTM E 466 : 2021 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM C 1834 : 2016 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures |
ASTM E 23 : 2023 : REV A | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 561 : 2023 | Standard Test Method for <emph type="bdit">K<inf>R</inf></emph> Curve Determination |
ASTM E 2899 : 2019 : EDT 1 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
ASTM C 1465 : 2008 : R2019 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
ASTM C 1421 : 2018 | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
ASTM E 1921 : 2023 : REV B | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 2714 : 2013 : R2020 | Standard Test Method for Creep-Fatigue Testing |
ASTM F 2077 : 2022 | Standard Test Methods for Intervertebral Body Fusion Devices |
ASTM E 2207 : 2015 : R2021 | Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
ASTM F 2193 : 2020 | Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
ASTM E 468/E468M : 2023 : REV A | Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
ASTM F 3122 : 2014 : R2022 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ASTM B 645 : 2021 | Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys |
ASTM E 1942 : 1998 : R2018 : EDT 1 | Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM B 909 : 2021 : REV A | Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products |
ASTM E 1820 : 2023 : REV B | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2899 : 2024 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
ASTM E 23 : 2024 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 647 : 2024 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 2472 : 2012 : R2018 : EDT 3 | Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 2760 : 2019 : EDT 2 | Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 2760 : 2019 : EDT 1 | Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 23 : 2023 : REV A | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 2472 : 2012 : R2018 : EDT 2 | Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
ASTM E 1681 : 2023 : EDT 1 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 1457 : 2023 | Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM E 1820 : 2024 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1681 : 2023 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
ASTM E 2899 : 2019 : EDT 1 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
ASTM E 1457 : 2023 : EDT 1 | Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.