ASTM E 185 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
Available format(s)
Hardcopy , PDF
Superseded date
24-09-2021
Superseded by
Language(s)
English
Published date
19-12-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 10
|
| DocumentType |
Standard Practice
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers procedures for designing a surveillance program for monitoring the radiation-induced changes in the mechanical properties of ferritic materials in light-water moderated nuclear power reactor vessels. New advanced light-water small modular reactor designs with a nominal design output of 300 MWe or less have not been specifically considered in this practice. This practice includes the minimum requirements for the design of a surveillance program, selection of vessel material to be included, and the initial schedule for evaluation of materials.
1.2This practice was developed for all light-water moderated nuclear power reactor vessels for which the predicted maximum fast neutron fluence (E > 1 MeV) exceeds 1 × 1021 neutrons/m 2 (1 × 1017 n/cm2) at the inside surface of the ferritic steel reactor vessel.
1.3This practice does not provide specific procedures for monitoring the radiation induced changes in properties beyond the design life. Practice E2215 addresses changes to the withdrawal schedule during and beyond the design life.
1.4The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Note 1:The increased complexity of the requirements for a light-water moderated nuclear power reactor vessel surveillance program has necessitated the separation of the requirements into three related standards. Practice E185 describes the minimum requirements for design of a surveillance program. Practice E2215 describes the procedures for testing and evaluation of surveillance capsules removed from a reactor vessel. Guide E636 provides guidance for conducting additional mechanical tests. A summary of the many major revisions to Practice E185 since its original issuance is contained in Appendix X1.
Note 2:This practice applies only to the planning and design of surveillance programs for reactor vessels designed and built after the effective date of this practice. Previous versions of Practice E185 apply to earlier reactor vessels. See Appendix X1.
| ASTM E 1005 : 2016 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance |
| ASTM E 1006 : 2021 | Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments |
| ASTM E 1297 : 2018 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
| ASTM E 509/E509M : 2021 | Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels |
| ASTM E 853 : 2018 | Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results |
| ASTM E 1018 : 2020 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
| ASTM E 636 : 2020 | Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels |
| ASTM E 900 : 2015 : EDT 2 | Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials |
| ASTM E 706 : 2016 | Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards |
| ASTM E 531 : 2013 | Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022) |
| ASTM E 1921 : 2009 : REV B | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV C | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1253 : 2007 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1820 : 2013 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2009 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2008 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2005 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1921 : 2017 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2008 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2011 : EDT 2 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2956 : 2014 | Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1820 : 2020 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| ASTM E 1921 : 2011 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2017 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2011 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2016 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2013 : REV A | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2006 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2298 : 2015 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2018 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2956 : 2021 | Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels |
| ASTM E 1820 : 2011 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2015 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1214 : 2011 : R2018 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM E 1214 : 2006 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
| ASTM E 1820 : 2008 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1214 : 1987 : R2000 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E706(IIIE) |
| ASTM E 1921 : 2009 : REV C : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2008 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2013 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2009 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1921 : 2015 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2019 : REV B | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2020 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2002 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1921 : 1997 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2007 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 2215 : 2010 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1921 : 2014 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2005 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2016 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1253 : 1999 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 23 : 2002 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1820 : 2015 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2015 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2018 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2020 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2019 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2018 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1921 : 2018 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2011 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2013 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2006 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1214 : 2011 : EDT 1 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM A 370 : 2011 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 2215 : 2019 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1253 : 2013 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1921 : 2014 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1214 : 2011 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
| ASTM E 1921 : 2019 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2018 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2015 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2018 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2021 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV C : EDT 2 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2016 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2020 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2002 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf>o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 1999 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2001 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2018 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1820 : 2013 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2015 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2298 : 2013 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2009 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2005 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2003 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2015 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2010 : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.