ASTM E 1941 : 2010 : R2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
Available format(s)
Hardcopy , PDF
Superseded date
06-12-2024
Superseded by
Language(s)
English
Published date
01-12-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.05, 2016 Defines the determination of carbon in refractory and reactive metals and their alloys in quantities from 20 [mu]g to 500 [mu]g.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method applies to the determination of carbon in refractory and reactive metals and their alloys in quantities from 20 μg to 500 μg. This corresponds to mass fractions ranging from 0.004 wt % to 0.100 wt % for a 0.5 g sample (see Note 1).
Note 1:Actual quantitative range might vary from manufacturer to manufacturer and according to sample mass. Samples of higher mass may allow for proportionally lower detection limits provided complete combustion of the sample is assured.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 9.
| ASTM F 2885 : 2017 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 1472 : 2014 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM B 862 : 2014 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 977 : 2013 | Standard Specification for Titanium and Titanium Ingots |
| ASTM B 299/B299M : 2018 | Standard Specification for Titanium Sponge |
| ASTM F 1813 : 2013 | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM F 2989 : 2013 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM F 2063 : 2018 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM B 387 : 2018 | Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire |
| ASTM B 863 : 2014 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| ASTM B 338 : 2017 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM F 3055 : 2014 : REV A | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 348 : 2013 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 2384 : 2010 : R2016 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM B 988 : 2018 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM F 1295 : 2016 | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B 1009 : 2018 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM B 265 : 2015 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM F 2146 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM B 381 : 2013 : R2019 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 2066 : 2018 | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM B 861 : 2014 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM F 3001 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 136 : 2013 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE AMS6952A | Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si - 0.06C Solution and Precipitation Heat Treated |
| SAE AMS4895 | Titanium Alloy, Round Bars 5Al - 1Fe Annealed |
| SAE AMS4934J | Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged |
| SAE AMS6901D | Titanium Alloy Bars, Forgings, and Forging Stock, 5Al - 2.5Sn, Extra Low Interstitial, Annealed |
| ASTM B 988 : 2018 : R2022 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM B 348/B348M : 2021 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM B 338 : 2017 : R2021 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 265 : 2020 : REV A | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM F 3049 : 2014 : R2021 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM B 863 : 2023 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM F 2989 : 2021 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM B 1009 : 2020 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM B 862 : 2023 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 386/B386M : 2019 : EDT 1 | Standard Specification for Molybdenum and Molybdenum Alloy Plate,<brk/>Sheet, Strip, Foil, and Ribbon |
| ASTM F 136 : 2013 : R2021 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 2146 : 2022 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F 2885 : 2017 : R2023 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM B 861 : 2024 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM F 3273 : 2017 : R2021 : EDT 1 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ASTM F 1472 : 2023 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM B 1009 : 2020 : REDLINE | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM F 3055 : 2014 : REV A : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 1295 : 2024 | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B 381 : 2021 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM F 2924 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3046 : 2021 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| ASTM F 3001 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 1813 : 2021 | Standard Specification for Wrought Titanium-12Molybdenum-6Zirconium-2Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM B 977/B977M : 2024 | Standard Specification for Titanium and Titanium Alloy Ingots |
| SAE AMS6949B | Titanium Alloy, Sheet and Strip, 4Al - 2.5V - 1.5Fe, Electron Beam Single Melted. Annealed |
| ASTM F 1713 : 2008 : R2021 : EDT 1 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM B 1009 : 2024 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM F 3056 : 2014 : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2066 : 2023 | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2024 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 1998 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1601 : 2010 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 50 : 2017 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 50 : 2024 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.