ASTM E 1999 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
Hardcopy , PDF
29-09-2023
English
13-06-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the analysis of cast iron by spark atomic emission spectrometry for the following elements in the ranges shown (Note 1):
| Ranges, % | |||
| Elements | Applicable Range, % | Quantitative Range, %A | |
| Carbon | 1.9 to 3.8 | 1.90 to 3.8 | |
| Chromium | 0 to 2.0 | 0.025 to 2.0 | |
| Copper | 0 to 0.75 | 0.015 to 0.75 | |
| Manganese | 0 to 1.8 | 0.03 to 1.8 | |
| Molybdenum | 0 to 1.2 | 0.01 to 1.2 | |
| Nickel | 0 to 2.0 | 0.02 to 2.0 | |
| Phosphorus | 0 to 0.4 | 0.005 to 0.4 | |
| Silicon | 0 to 2.5 | 0.15 to 2.5 | |
| Sulfur | 0 to 0.08 | 0.01 to 0.08 | |
| Tin | 0 to 0.14 | 0.004 to 0.14 | |
| Titanium | 0 to 0.12 | 0.003 to 0.12 | |
| Vanadium | 0 to 0.22 | 0.008 to 0.22 | |
Note 1:The ranges of the elements listed have been established through cooperative testing of reference materials. These ranges can be extended by the use of suitable reference materials.
1.2This test method covers analysis of specimens having a diameter adequate to overlap the bore of the spark stand opening (to effect an argon seal). The specimen thickness should be sufficient to prevent overheating during excitation. A heat sink backing may be used. The maximum thickness is limited only by the height that the stand will permit.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 1095 : 2015 : R2019 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| ASTM A 1095 : 2015 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| ASTM E 826 : 2014 | Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023) |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1329 : 2000 : R2005 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis |
| ASTM E 1806 : 1996 : R2006 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 1998 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 2972 : 2015 | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM E 1601 : 2010 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1329 : 2010 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis (Withdrawn 2019) |
| ASTM E 1806 : 2009 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 1806 : 2009 : R2016 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 1329 : 2000 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis |
| ASTM E 1763 : 2006 | Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods (Withdrawn 2015) |
| ASTM E 305 : 2013 | Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E2972 : 2015(2019) | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 2018 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1763 : 1998 | Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 1996 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 305 : 2021 | Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 2023 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 1996 : R2001 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.