![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 2104 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
Hardcopy , PDF
28-06-2022
English
08-06-2015
Committee |
E 07
|
DocumentType |
Standard Practice
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice establishes the minimum requirements for radiographic examination of metallic and nonmetallic materials and components used in designated applications such as gas turbine engines and flight structures.
1.2The requirements in this practice are intended to control the radiographic process to ensure the quality of radiographic images produced for use in designated applications such as gas turbine engines and flight structures; this practice is not intended to establish acceptance criteria for material or components. When examination is performed in accordance with this practice, engineering drawings, specifications or other applicable documents shall indicate the acceptance criteria.
1.3All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 2981 : 2015 : EDT 1 | Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 2982 : 2014 : EDT 1 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 2981 : 2021 | Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 1254 : 2013 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1079 : 2021 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 1025 : 2011 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1079 : 2005 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 2033 : 1999 : R2013 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1032 : 2012 | Standard Test Method for Radiographic Examination of Weldments |
ASTM E 1079 : 2010 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 1817 : 2008 : R2014 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1815 : 1996 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1030 : 2000 | Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1030 : 2005 | Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1165 : 2012 : R2017 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1032 : 1995 | Standard Test Method for Radiographic Examination of Weldments |
ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1815 : 2018 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 2698 : 2018 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
ASTM E 1817 : 2008 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1032 : 2006 | Standard Test Method for Radiographic Examination of Weldments |
ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
ASTM E 1165:2012 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
ASTM E 1079 : 2000 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
ASTM E 2033 : 1999 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
ASTM E 1165 : 1992 : R1996 : EDT 1 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1254 : 2008 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1817 : 2003 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
ASTM E 1815 : 2008 : R2013 : EDT 1 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1390 : 2006 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1390 : 2021 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1254 : 2003 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
ASTM E 1025 : 2005 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1032 : 2001 | Standard Test Method for Radiographic Examination of Weldments |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 1165 : 2020 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1030 : 2005 : R2011 | Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1254 : 1998 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1390 : 1990 : R2000 | Standard Guide for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1025 : 1998 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1815 : 2008 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1815 : 2006 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 1032 : 2019 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
ASTM E 1254 : 2013 : R2018 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 1390 : 2012 : R2016 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1165 : 1992 : R2002 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1390 : 2012 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM E 2033 : 1999 : R2006 | Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1165 : 2004 : R2010 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
ASTM E 1165 : 2004 | Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1817 : 1996 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1079 : 2016 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.