ASTM E 2253 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
Hardcopy , PDF
18-08-2021
English
19-04-2016
Committee |
E 37
|
DocumentType |
Test Method
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method provides procedures for validating temperature and enthalpy measurements of differential scanning calorimeters (DSC) and analytical methods based upon the measurement of temperature or enthalpy (or heat), or both, by DSC. Performance parameters determined include temperature and calorimetric repeatability (precision), detection limit, quantitation limit, linearity, and bias. This test method is applicable to exothermic events.
1.2Validation of apparatus performance and analytical methods is requested or required for quality initiatives or where results may be used for legal purposes.
1.3The values stated in SI units are to regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ASTM E 1860 : 2007 | Standard Test Method for Elapsed Time Calibration Thermal Analyzers |
ASTM E 1860 : 2002 | Standard Test Method for Elapsed Time Calibration Thermal Analyzers |
ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM E 2161 : 2015 : R2019 | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
ASTM E 1142 : 2011 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2012 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1860 : 2013 : R2018 | Standard Test Method for Elapsed Time Calibration of Thermal Analyzers |
ASTM E 2161 : 2015 | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
ASTM E 1142 : 1997 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2021 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 2161 : 2013 | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 1142 : 2013 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1970 : 2011 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 1970 : 2000 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 1142 : 2004 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2006 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 473 : 2018 | Standard Terminology Relating to Thermal Analysis and Rheology |
ASTM E 1142 : 2015 : R2020 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2161 : 2021 : REV A | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
ASTM E 1860 : 2013 | Standard Test Method for Elapsed Time Calibration of Thermal Analyzers |
ASTM E 2161 : 2001 | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 2161 : 2006 : REV A | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 2161 : 2008 | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 1142 : 2007 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2161 : 2021 | Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology |
ASTM E 1142 : 2014 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2014 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2005 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2015 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1970 : 2016 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 968 : 1999 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
ASTM E 2161:2006 | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 1142 : 2011 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2021 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2161 : 2007 : REV A | Standard Terminology Relating to Performance Validation in Thermal Analysis |
ASTM E 1970 : 2006 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 1860 : 1997 : REV A | Standard Test Method for Elapsed Time Calibration Thermal Analyzers |
ASTM E 1970 : 2001 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.